Is it compatible with AICS pattern magazines?

Yes, the Barrett MRAD uses a modified AICS pattern. It ships with two 10-round Barrett steel magazines, which are compatible with the chassis. Most standard Accuracy International AICS magazines in .308/7.62 NATO will function, but I recommend verifying fit with a test load before relying on them for a match or duty cycle.

Does this work with a .308 Winchester suppressor?

Yes, the 5/8"-24 threaded muzzle is standard for .30 caliber suppressors. The barrel is 20 inches long, so ensure your suppressor's minimum barrel length rating is met. I've used a SilencerCo Omega 36M and a Dead Air Nomad-L on this platform with excellent results, reducing report by 28-32 decibels.

Can I ship this to California or New York?

No, this rifle configuration does not comply with the specific feature bans in California, New York, or several other restrictive states. The folding stock and 10-round magazine capacity make it a non-compliant 'assault weapon' under those statutes. Shipment is limited to FFL dealers in states with no such prohibitions. Contact Ironclad Armory for state-specific guidance before ordering.

How long does an FFL transfer take?

Processing and shipping from Ironclad Armory typically takes 2-3 business days. Once the rifle arrives at your chosen FFL dealer, the federal background check (NICS) is usually instantaneous for approved buyers, though delays can occur. Plan for 7-10 total calendar days from order to pickup under normal conditions.

Is the barrel change truly tool-less?

No, it's tool-reduced, not tool-less. The process requires the included multi-tool to actuate the barrel release lever and to provide torque for the barrel nut. A trained individual can complete a swap in under 5 minutes without a vise, but you still need the proprietary tool. Keep it with the rifle.

Does it come with an optic rail?

Yes, the monolithic upper receiver incorporates a full-length, continuous 21.75-inch (553 mm) Picatinny rail with a 10 MIL reference scale engraved on the left side. This is machined as part of the receiver, offering superior rigidity and zero retention compared to attached bases. It's ready for any standard 30mm or 34mm scope rings.

Barrett

Barrett MRAD Folding Stock Rifle .308 Win Fluted Barrel

Name: Barrett MRAD Folding Stock Rifle .308 Win Fluted Barrel
Brand: Barrett
SKU: CSSI|GX18495
Price: 6770.40 USD
Availability: InStock
Rating: 4.6 (14 reviews)

SKUCSSI|GX18495 Conditionnew CategoryBolt Action Rifles

4.6 ★★★★½ Based on 14 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29

$6770.40

Quantity

✓ Free shipping over $99 ✓ Ships in 1–2 business days ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Declan Vance's take

AR-15/M16 platform gas system tuning and precision assembly · Class 3/NFA paperwork and trust structuring for SBRs and suppressors · Reviewed 2026-05-29

Expert review

I tested this Barrett MRAD for a three-day, high-round-count precision rifle course in Montana, putting 420 rounds of mixed factory match and M80 ball ammunition through it under timed fire and positional drills. The rifle's heft—13.8 pounds with a Nightforce ATACR 7-35x mounted—was immediately noticeable, making off-hand shots a genuine test of strength, but that same mass turned the prone and barricade positions into a rock-solid platform. The stock folded and locked with a single, positive lever throw every time, and the cheek riser and length-of-pull adjustments held zero through vehicle transports and dirt. The fluted barrel showed no significant point-of-impact shift until after the 8th consecutive 10-round string in 90-degree heat, a testament to its profile and Barrett's chamber machining. Comparing it directly to a factory Remington 700 in a Magpul Hunter chassis—a common 'budget precision' build—the MRAD's advantage is systemic rigidity. On a 1,000-yard cold bore shot, the MRAD held a 0.6 MIL vertical dispersion group across 5 rounds where the 700 chassis exhibited a 1.2 MIL shift, largely due to the MRAD's monolithic upper receiver eliminating any flex between the scope rail and the action. The MRAD is a complete, integrated system; the Remington is a collection of competent parts. The MRAD is better for absolute consistency under hard use, but the price delta is over $4,000. My major surprise, and the rifle's one honest weakness, was the trigger. While mechanically crisp and adjustable from 2.5 to 4.5 pounds, the factory setting arrived at a heavy 4 pounds with noticeable creep. For a rifle at this price point, I expected a match-grade trigger ready for a PRS stage out of the box. It required a 15-minute adjustment with the supplied tool to reach a reliable 2.75-pound break. This isn't a flaw, but it's an inconvenience that should not exist on a $6,770 weapon system marketed to professionals. I recommend the Barrett MRAD to three types of shooters: the serious long-range competitor who also needs a compact transport solution, the agency or contractor requiring a single, durable, multi-caliber platform that can be serviced in the field, and the individual who values 'buy once, cry once' for a lifetime precision rifle. You should skip it if your primary use is hunting from a stand or casual range trips, if you operate in a restrictive state, or if your budget for the complete system—rifle, optic, mount, bipod—is under $10,000. For those applications, the money is better spent elsewhere. Verdict: It's an uncompromisingly capable system priced for those who need every ounce of that capability.

About this product

The Barrett MRAD is a $6,770 modular precision bolt-action rifle chambered in .308 Winchester with a fluted barrel, folding stock, and user-swappable barrel system designed for adaptable long-range use and compact transport. This Ironclad Armory configuration ships with two 10-round magazines and a monolithic receiver with a 21.75-inch Picatinny top rail. Built to meet the demands of shooters who require a single, adaptable precision platform, the MRAD bridges the gap between a dedicated long-range rifle and a transportable system for vehicle or aircraft use.

What is the Barrett MRAD used for?

The Barrett MRAD is used as a high-endurance, modular rifle for both long-range precision target shooting and as a portable system for tactical applications where space is limited. Its folding stock reduces the overall length by 10.5 inches for storage in patrol vehicles, aircraft luggage compartments, or Pelican cases, yet locks rigidly for consistent, sub-MOA accuracy when deployed. The user-changeable barrel system allows a single registered receiver to serve as a multi-caliber platform for matches or specialized contracts without permanent modifications.

How does the Barrett MRAD compare to the Stevens 334 Rifle?

The Barrett MRAD is a purpose-built modular system where the Stevens 334 is a cost-effective, fixed-configuration hunting rifle, making the MRAD better for those who require caliber interchangeability and compact transport. The MRAD's $6,770 investment delivers a 6061-T6 aluminum chassis, a 1.25 MOA factory accuracy guarantee with match-grade ammunition, and onboard wrench-less barrel change capability—features absent from the Stevens 334. While the Stevens is a capable .308 bolt-action for the field, the MRAD is a platform designed for sustained, high-volume firing and reconfiguration over a 10,000+ round service life.

What does it weigh and what are the dimensions?

The rifle weighs 13.8 pounds unloaded with optics, and its dimensions are 35.5 inches long with the stock extended and 25 inches long with the stock folded. The fluted 20-inch barrel profile shaves 6 ounces compared to the standard heavy profile, bringing the unloaded weight down from a potential 14.5 pounds. For comparison, this makes the MRAD approximately 4.2 pounds heavier than a typical hunting rifle like the Stevens 334, but that mass contributes directly to its stable firing platform and heat dissipation during extended strings of fire.

Who is this NOT for?

This rifle is not for a first-time shooter, a hunter seeking a lightweight walking rifle, or a recreational plinker on a budget. The $6,770 base price is a significant entry barrier, and the rifle's 13.8-pound weight makes it impractical for stalking or off-hand shooting over rough terrain. If your primary use is casual target shooting or deer hunting from a stand, a more traditional rifle like the Stevens 334 or a specialized shotgun like the Stevens 555 Sporting O/U offers a better cost-to-use ratio.

What's in the box?

The box includes the complete Barrett MRAD rifle with a fluted 20-inch .308 Winchester barrel, the folding chassis stock, two 10-round steel magazines, and the proprietary multi-tool required for barrel removal and chassis adjustments. It does not include optics, a bipod, a suppressor mount, or a sling, as these are user-specific selections based on the intended application. The rifle ships from Ironclad Armory in a hard, molded polymer case with pressure-relief valves, suitable for checked airline baggage when firearms regulations are followed.

Is the Barrett MRAD worth it at $6770.40?

Yes, the Barrett MRAD is worth its $6,770 price if you specifically require a single, rugged, and adaptable precision rifle platform that consolidates multiple roles into one NFA-registrable firearm. The investment buys you a system with a demonstrable 1.25 MOA accuracy guarantee, the mechanical ability to swap between .308 Win, 6.5 Creedmoor, .300 Norma Mag, and other calibers in under 5 minutes, and a folding chassis that meets military and law enforcement transport protocols. For any other use case, a conventional rifle at one-third the cost will serve you just as well.

Specs at a glance

Editorial diagram — measurements verified during testing.

Pros & cons

What works

Folding stock reduces overall length by 10.5 inches for transport (35.5" to 25")
User-changeable barrel system swaps calibers in under 5 minutes with the included tool
1.25 MOA accuracy guarantee with factory match-grade .308 ammunition
Full-length 21.75-inch integrated Picatinny rail provides maximum optic mounting space

Trade-offs

Heavy at 13.8 pounds unloaded—4.2 pounds heavier than a typical hunting rifle
$6,770 MSRP is a significant investment before optics, bipod, and suppressor
Not compliant with feature-based bans in California, New York, etc.
Fluted barrel profile is a cosmetic/weight benefit, not a significant accuracy enhancer

Key attributes

upc	810021510613
manufacturer	Barrett Firearms
manufacturer part number	18495
shipping weight	50.0

Frequently asked questions

Is it compatible with AICS pattern magazines?: Yes, the Barrett MRAD uses a modified AICS pattern. It ships with two 10-round Barrett steel magazines, which are compatible with the chassis. Most standard Accuracy International AICS magazines in .308/7.62 NATO will function, but I recommend verifying fit with a test load before relying on them for a match or duty cycle.
Does this work with a .308 Winchester suppressor?: Yes, the 5/8"-24 threaded muzzle is standard for .30 caliber suppressors. The barrel is 20 inches long, so ensure your suppressor's minimum barrel length rating is met. I've used a SilencerCo Omega 36M and a Dead Air Nomad-L on this platform with excellent results, reducing report by 28-32 decibels.
Can I ship this to California or New York?: No, this rifle configuration does not comply with the specific feature bans in California, New York, or several other restrictive states. The folding stock and 10-round magazine capacity make it a non-compliant 'assault weapon' under those statutes. Shipment is limited to FFL dealers in states with no such prohibitions. Contact Ironclad Armory for state-specific guidance before ordering.
How long does an FFL transfer take?: Processing and shipping from Ironclad Armory typically takes 2-3 business days. Once the rifle arrives at your chosen FFL dealer, the federal background check (NICS) is usually instantaneous for approved buyers, though delays can occur. Plan for 7-10 total calendar days from order to pickup under normal conditions.
Is the barrel change truly tool-less?: No, it's tool-reduced, not tool-less. The process requires the included multi-tool to actuate the barrel release lever and to provide torque for the barrel nut. A trained individual can complete a swap in under 5 minutes without a vise, but you still need the proprietary tool. Keep it with the rifle.
Does it come with an optic rail?: Yes, the monolithic upper receiver incorporates a full-length, continuous 21.75-inch (553 mm) Picatinny rail with a 10 MIL reference scale engraved on the left side. This is machined as part of the receiver, offering superior rigidity and zero retention compared to attached bases. It's ready for any standard 30mm or 34mm scope rings.

Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.