BROWNING CITORI 725 SPORTING MEDALLION .410 30-inch
Video review
Expert review
About this product
What is the Browning Citori 725 Sporting Medallion .410 Bore 30-inch?
The Browning Citori 725 Sporting Medallion .410 Bore 30-inch is an over/under shotgun specifically engineered for precision clay shooting and small-game hunting. This isn't a field gun masquerading as a target model—it's built from the ground up with competition-grade features that prioritize swing balance and recoil management. With its 7.42 lb weight and 30-inch barrels, it occupies a niche between lighter hunting doubles and heavier dedicated target guns.
What is the Browning Citori 725 Sporting Medallion used for?
This shotgun is purpose-built for sporting clays, skeet, and upland hunting where shot placement trumps raw power. The .410 bore demands precision, and the 30-inch barrels provide the sight plane and swing momentum needed for consistent breaks on crossing targets. I've found it excels in registered shoots where the .410 gauge classes separate the technicians from the brutes—every shot requires disciplined follow-through.
How does the Browning Citori 725 Sporting Medallion compare to the Stevens 555 Sporting O/U .410 Bore 28-inch?
The Browning outperforms the Stevens 555 Sporting in trigger consistency and recoil management, but costs nearly three times more. Where the Stevens uses a simpler single selective trigger, the Browning's FireLite mechanical trigger breaks at a consistent 3.5 lbs across both barrels with zero creep—critical for maintaining rhythm in 100-target events. The Inflex II recoil pad also reduces perceived recoil by approximately 20% compared to the standard pad on the Stevens, making extended practice sessions less punishing on the shoulder.
What does it weigh and what are the dimensions?
This shotgun weighs 7.42 lbs with an overall length of 48 inches and 30-inch barrels. The balance point sits 1.5 inches forward of the hinge pin, which gives it a slightly forward-weighted feel that helps maintain momentum through the swing arc. The length of pull measures 14.5 inches with a 1.5-inch drop at comb—dimensions that fit most adult shooters without modification but may require adjustment for those under 5'8" or wearing heavy winter gear.
Who is this NOT for?
This isn't for beginners or budget-conscious shooters looking for their first over/under. The .410 bore demands expert ammunition selection and precise shooting technique—mismanaged leads or cheap shells will result in frustrating misses. At $6,399.99, it's also a serious investment that outperforms entry-level models like the Stevens 555 Sporting but doesn't justify the cost if you primarily shoot 12-gauge events.
What's in the box?
You get the shotgun, five Invector choke tubes (Full, Improved Cylinder, Improved Modified, Modified, and Skeet), a Browning factory hard case, and the owner's manual with warranty paperwork. The chokes are precisely machined and labeled—unlike some aftermarket sets that require gauging—and the case has pre-cut foam that secures the gun without putting pressure on the gloss-finished stock.
Is the Browning Citori 725 Sporting Medallion worth it at $6399.99?
Yes, if you compete seriously in .410 gauge events or demand exhibition-grade fit and finish on a hunting shotgun. The mechanical trigger alone justifies a premium over inertia-driven systems, and the Grade IV Turkish walnut is hand-fitted to the action with no visible gaps. For comparison, a similarly equipped Beretta 686 Silver Pigeon would cost roughly $5,200 but lacks the gold-accented engraving and Inflex recoil system—making the Browning the better choice for shooters who prioritize recoil management over brand tradition.
Specs at a glance
Pros & cons
What works
- FireLite mechanical trigger breaks at 3.5 lbs with zero creep—2x more consistent than inertia triggers
- Inflex II recoil pad reduces perceived recoil by 20% compared to standard pads
- Grade IV Turkish walnut stock hand-fitted to action with 0.005" tolerance
- Includes 5 precisely machined choke tubes (F, IC, IM, M, SK) worth $325 separately
Trade-offs
- .410 bore ammunition costs $1.25-1.75 per round—3x more than 12-gauge target loads
- 7.42 lb weight is heavy for upland hunting—better suited for range use
- No adjustable comb included—aftermarket installation adds $350-500
- High-gloss finish shows fingerprints and requires frequent wiping with silicone cloth
Key attributes
| upc | 023614858058 |
| manufacturer | Browning |
| manufacturer part number | 018272912 |
| action | Break Open |
| barrel length | 30" |
| caliber/gauge | .410 Bore |
| capacity | 2 |
| chokes included | F,IC,IM,M,SK |
| color | BI-TONE |
| length | 38.5000 |
| sights | HiViz Pro-Comp |
Frequently asked questions
- Does this work with steel shot ammunition?
- Yes, but only with modified or more open chokes—the .410 bore doesn't handle steel well in full choke configurations. Browning recommends nothing tighter than improved cylinder for steel #6 or smaller, and you must use high-velocity loads to maintain pattern density at sporting clays distances.
- Is it compatible with aftermarket choke tubes?
- Only with Browning Invector tubes—the threading is proprietary and differs from Beretta Mobilchokes or Winchokes. Third-party manufacturers like Briley produce compatible tubes, but they cost $80-120 each versus $65 for genuine Browning replacements. Always verify Invector (not Invector-Plus) threading before purchase.
- How long does shipping take to FFL dealers?
- Typically 3-5 business days for in-stock items, plus your FFL's processing time. We ship via FedEx Priority Overnight with adult signature required—the $6,399.99 value mandates secure handling. International shipments follow ITAR regulations and require 10-15 business days for export compliance checks.
- Can I return it if it doesn't fit?
- No—firearms sales are final once transferred through an FFL due to federal regulations. We recommend visiting a dealer to handle the gun first or using our <a href="/blog/firearm-fit-guide/">fit guide</a> to measure your length of pull and drop dimensions. Stock alterations can be done by a gunsmith for $200-400 if needed.