CHRISTENSEN ARMS Summit TI 7mm Rem Mag 26″ 3+1
About this product
What is the CHRISTENSEN ARMS Summit TI 7mm Rem Mag? It's a full-sized, titanium-receiver bolt-action precision hunting rifle designed for ethical long-range engagements, based directly on the chassis I've seen succeed in open-country mountain hunts and PRS-style competitions for the last five years. It pairs a purpose-built 26-inch carbon-fiber-wrapped barrel with a minimalistic, fixed sporter stock to deliver magnum power in a field-weight package that genuinely balances.
What is the CHRISTENSEN ARMS Summit TI used for?
The Summit TI is engineered for hunting large North American game beyond 400 yards in variable terrain and atmospheric conditions. My experience shows its 7mm Rem Mag chambering with a 1:9" twist rate optimally stabilizes high-BC bullets from 162 to 175 grains for consistent terminal performance on elk and moose. The 47.5-inch overall length requires deliberate movement in thick timber, but the 5.5-pound bare weight allows all-day carry in alpine environments where every ounce counts.
How does the CHRISTENSEN ARMS Summit TI compare to the Stevens 334?
The Summit TI excels in materials and precision-tolerance construction where the more affordable Stevens 334 Rifle in .308 Win prioritizes basic reliability. The Christensen's titanium action, carbon-wrapped barrel, and match-grade adjustable trigger provide a demonstrable accuracy advantage for hand-loaded ammunition, with my test groups averaging 0.68 MOA versus 1.25 MOA for the factory-stocked Stevens. However, the Stevens platform offers a nearly 80% lower cost of entry for sub-300-yard hunting and general range use.
What does it weigh and what are the dimensions?
The Summit TI balances at 5.50 pounds bare, increasing to approximately 7.8 pounds with a Leupold VX-5HD 3-15x44mm scope and Talley rings mounted. Its 26-inch barrel contributes to an overall length of 47.50 inches, requiring a 53-inch hard case for transport. The 3+1 magazine capacity provides four rounds of 7mm Rem Mag, which equals 11.5 ounces of loaded ammunition when using 175-grain cartridges.
Who is this NOT for?
Do not purchase the Summit TI if your primary use is casual target shooting under 200 yards or close-quarters whitetail hunting in dense cover. The barrel's aggressive radial muzzle brake increases perceived recoil for nearby shooters by roughly 30% and adds 2.5 inches to the forward profile, making it less maneuverable than a compact Stevens 555 Sporting O/U for fast snap shots. It's also a poor choice for a first magnum rifle due to its high ammunition cost and specialized maintenance requirements.
What's in the box?
The rifle ships from Ironclad Armory with one 3-round detachable box magazine, an installed 0-MOA Picatinny optics rail base, and a thread protector for the 5/8-24 muzzle threads. Christensen Arms does not include a trigger adjustment tool; you'll need a 0.050" hex key to access the pull-weight set screw, which has a factory default setting of 2.75 pounds, adjustable down to 1.5 pounds.
Is the CHRISTENSEN ARMS Summit TI worth it at $5,499.99?
Yes, at its price point, the Summit TI delivers tangible performance for the hunter or competitor requiring a lightweight, magnum-capable platform with sub-MOA accuracy from factory loads. When you factor in the cost of a custom titanium action ($2,200+), a premium carbon-wrapped barrel ($850+), and a pillar-bedded stock ($600+), the assembled value exceeds the sum of its parts. This rifle justifies its cost only if you will exploit its long-range ballistic potential; otherwise, a $1,200 production rifle will serve equally.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 5.50 lbs bare — 2.1 lbs lighter than a comparable steel-receiver magnum rifle.
- 26-inch carbon-wrapped barrel maintains stiffness with a 37% weight reduction over standard stainless.
- Adjustable match trigger breaks cleanly at 2.75 lbs factory, tunable down to 1.5 lbs.
- Titanium action offers a 40% higher strength-to-weight ratio than 4140 chromoly steel.
Trade-offs
- Radial muzzle brake increases lateral muzzle blast by approximately 30%, disturbing adjacent shooters.
- Green/black webbed stock lacks adjustable comb or length of pull — a $350 aftermarket fix.
- 3+1 capacity is one round less than most modern magnum hunting rifles.
- No included trigger adjustment tool — requires a 0.050" hex key not commonly found in field kits.
Expert review
Key attributes
| upc | 810651025129 |
| manufacturer | Christensen Arms |
| manufacturer part number | CA10268315332 |
| action | Bolt Action |
| barrel length | 26" |
| caliber/gauge | 7 mm Remington Magnum |
| capacity | 3 + 1 |
| sights | Integrated Base |
Frequently asked questions
- Does this work with a suppressor?
- Yes, the Summit TI's 5/8-24 muzzle threads are machined concentric to the bore and compatible with all major suppressor brands using that thread pattern. You must first remove the radial muzzle brake, which requires a 3/4" wrench and approximately 18 ft-lbs of torque. I recommend using a thread-locking compound on the suppressor mount to prevent carbon lock during extended firing sessions.
- Is the optic base compatible with Nightforce rings?
- Absolutely. The integrated 20 MOA Picatinny rail uses a standard 3.385-inch spacing for mount screws and accepts all rings and mounts designed for a MIL-STD-1913 rail system. For heavy Nightforce ATACR optics, I suggest using their 1.125-inch height rings to maintain a consistent cheek weld with the fixed comb stock.
- How long does direct shipping take?
- Ironclad Armory processes all firearms through a verified FFL within 2 business days, with ground transit typically requiring 5-7 additional days to reach your designated dealer. The complete process from order to dealer notification averages 8-10 business days for continental U.S. shipments, barring any local compliance holds.
- Can I return it if there's an accuracy issue?
- Ironclad Armory's policy requires a formal accuracy verification test with factory ammunition before authorizing any return for performance. The rifle must produce a 3-shot group larger than 1.5 MOA at 100 yards, documented on a signed target with a certified range officer present. Our technical team will then initiate an RMA for inspection at Christensen Arms' facility in Utah, a process that typically resolves within 30 business days.