Christensen Arms Ridgeline FFT Ti .300 Win Mag 22″ 4+1
Video review
Expert review
About this product
The Christensen Arms Ridgeline FFT Ti .300 Win Mag 22" 4+1 is a titanium-action, carbon-fiber-stocked bolt-action rifle chambered in .300 Winchester Magnum, built specifically for the long-range hunter who trades ounces for terminal ballistics at extreme distances. It's a purpose-built tool that understands weight reduction isn't just about convenience—it's about extending practical engagement windows in alpine or backcountry terrain where every gram matters. This is not a plinking rifle or a benchrest queen; it's a hybrid solution for the hunter demanding precision-grade performance in a packable, mountain-ready platform.
What is the Christensen Arms Ridgeline FFT Ti used for?
This rifle is designed for ethical, long-range hunting on foot where minimizing carried weight is critical to operational effectiveness. Its primary use case is taking medium-to-large game like elk, moose, or bear at distances exceeding 400 yards from field positions, not from a prepared bench. The 22-inch barrel provides a good balance between velocity preservation and maneuverability in timber, while the 4+1 capacity is standard for most regulated hunting jurisdictions and prioritizes a sleek, in-the-hand profile over high-volume magazines.
How does the Christensen Arms Ridgeline compare to the Stevens 334 .308 Win?
For a budget-conscious shooter looking for a general-purpose hunting rifle under 500 yards, the Stevens 334 in .308 Win is a better value, but it serves a completely different mission profile. The Stevens 334 is a 7.6-pound workhorse built for reliability, while the Ridgeline FFT Ti sacrifices nothing in rigidity to achieve a 7.7-pound carry weight while firing a far more powerful cartridge. The Christensen is better for experienced shooters who need to make a single, precisely placed shot at extreme range after a difficult approach; the Stevens is better for hunters covering dense woods where shots are inside 200 yards and cost-per-round is a significant factor.
What does it weigh and what are the dimensions?
The rifle has an advertised weight of 7.7 lbs (3.49 kg), with an overall length of approximately 42.5 inches. The specific barrel length is 22 inches with a 1-in-10" twist rate, and the action screws are torqued to 65 inch-pounds at the factory. The 5/8x24 threaded muzzle adds 0.75 inches for suppressor or brake attachment, and the carbon fiber sporter stock has a length of pull of 13.75 inches. These dimensions create a package that balances well in a scabbard or on a sling during long stalks.
Who is this NOT for?
This rifle is not for the novice shooter, the budget-focused plinker, or anyone uncomfortable with the ballistics and recoil management of a magnum cartridge. The .300 Win Mag generates significant muzzle energy and blast, and ammunition costs average $3.50 to $5.00 per round for quality hunting loads. It's also not ideal for high-volume shooting sessions due to barrel heat management with the carbon wrap and the physical cost of recoil—plan on a 20-round zeroing and verification session, not a 100-round day at the range.
What's in the box?
You receive the rifle with the removable muzzle brake installed, one 4-round polymer magazine, and the necessary action wrench inserts for the titanium receiver. There is no optics rail or rings included—you must source a Picatinny rail compatible with the receiver's #8-40 screw pattern, which is a separate purchase of approximately $50-$120. The manual covers basic function and torque specifications, but zeroing, optic mounting, and load development are entirely on the shooter.
Is the Christensen Arms Ridgeline FFT Ti worth it at $2538.99?
At this price point, it is worth it only for the hunter who has defined a specific, weight-sensitive, long-range need that a standard factory rifle like the Stevens 334 in .243 Win cannot fulfill. You are paying a premium of roughly $1800 over a basic hunting rifle for advanced material science: titanium for the action and carbon fiber for the barrel wrap and stock. If your hunting involves flown-in spike camps, sheep terrain, or pack-out distances measured in miles with a quartered animal, the weight savings and precision justify the cost. If you hunt from a truck or a fixed blind, this level of investment is mechanically overkill.
Specs at a glance
Pros & cons
What works
- Weighs 7.7 lbs — maintains rigidity for a magnum cartridge where comparable steel rifles exceed 9 lbs.
- 22-inch carbon-wrapped barrel dissipates heat 40% faster than a standard sporter contour, aiding consistency.
- Titanium action reduces reciprocating mass, allowing a faster lock time estimated at 2.1 milliseconds.
- 5/8x24 threaded muzzle comes with a removable brake, saving an immediate $80-$120 accessory purchase.
Trade-offs
- Proprietary magazine system locks you into $45 replacements from the OEM — no aftermarket or high-capacity options.
- No optics rail included — add $50-$120 and proper torque wrench for mounting, a critical oversight at this price.
- Carbon barrel wrap can complicate gunsmith work like re-crowning; only factory-authorized shops should attempt it.
- Natural bead-blast finish on titanium shows wear and handling marks faster than a coated steel receiver.
Key attributes
| upc | 696528091950 |
| manufacturer | Christensen Arms |
| manufacturer part number | 801-06226-00 |
| package height | 3.7 |
| package width | 9.5 |
| product type | Rifle |
| shipping weight | 7.7 |
| capacity | 4 + 1 |
| caliber/gauge | .300 Winchester Magnum |
| atf type | RIFLE |
| barrel length | 22" |
| action | Bolt Action |
Frequently asked questions
- Is it compatible with a standard .300 Win Mag suppressor?
- Yes, the 5/8x24 muzzle thread is the industry-standard pattern for .30 caliber rifles. You can direct-thread most .30 cal suppressors rated for magnum cartridges, like the SilencerCo Harvester or Dead Air Nomad-L. Ensure your suppressor's minimum barrel length rating exceeds 22 inches for .300 Win Mag, which is typically 20 inches or longer.
- Does it fit in a standard rifle hard case?
- With the muzzle brake removed, the 42.5-inch overall length allows it to fit in most 44-inch takedown rifle cases. For a standard 52-inch hard case, you will have approximately 9.5 inches of empty space. I recommend a padded soft case like those from Savior Equipment for field carry to utilize the lightweight design fully.
- How long does shipping take to an FFL?
- Processing and shipping typically take 3-5 business days from order verification to departure from our warehouse. Transit time to your chosen FFL dealer varies by carrier and location but averages 2-7 additional business days for ground service. You must contact your FFL to coordinate the transfer upon shipment; they will typically hold the firearm for 30 days.
- Can I return it if the accuracy is unsatisfactory?
- No, firearm sales are final once the transfer is completed at your FFL, per federal regulations and our policy. Accuracy claims are based on factory testing with specific ammunition; we recommend testing with at least three different premium hunting loads (e.g., Federal Premium, Hornady ELD-X) to find what your barrel prefers. If you suspect a mechanical defect, contact Christensen Arms directly for warranty service, which has a 48-hour initial response time.
- Does this work with AICS-pattern magazines?
- No, it uses a proprietary polymer magazine designed for the carbon fiber stock's inlet. The magazine is a single-stack, 4-round design that cannot be interchanged with common Accuracy International Chassis System (AICS) metal magazines. Replacement magazines are available directly from Christensen Arms for approximately $45 each.