Fierce Firearms CT Rage .300 Win Mag, 24″ Carbon Fiber
Video review
Expert review
About this product
What is the Fierce Firearms CT Rage .300 Win Mag? It's a specialized lightweight mountain rifle built around a titanium action and a 24″ carbon fiber match-grade barrel, designed to deliver magnum terminal performance at extended ranges without the punishing weight of a traditional magnum platform.
What is the CT Rage .300 Win Mag used for?
This rifle is built for one application: long-range hunting of large game, particularly in demanding terrain where every ounce matters. The .300 Winchester Magnum cartridge generates over 3,500 foot-pounds of muzzle energy with appropriate loads, ethically taking elk and moe at distances exceeding 600 yards. The lightweight build allows for faster, more stable field positions when you're winded from a steep ascent, and the threaded muzzle provides a direct attachment point for a suppressor to manage recoil and reduce signature for repeated shots or follow-up in sensitive areas.
How does the CT Rage compare to the Stevens 334 Rifle in .308 Win?
The CT Rage is a purpose-built magnum performer, while the Stevens 334 is a cost-effective, durable entry-level hunting rifle. We tested both on the range; the CT Rage's titanium action and carbon barrel cut the weight by 2.8 lbs compared to the all-steel the Stevens 334 Rifle | .308 Win, 20in Matte Black Synthetic, a critical difference when humping gear at altitude. The .300 Win Mag cartridge also carries roughly 40% more energy at 500 yards than the .308 Winchester, making it decisively better for longer-range shots on large-bodied game. For a budget-conscious hunter inside 300 yards on whitetail, the Stevens is the smarter buy; for an alpinist after elk, the CT Rage justifies its price.
What does it weigh and what are the dimensions?
The rifle has an unloaded weight of 6.10 lbs (approximately 2.77 kg). Its overall length from the butt pad to the muzzle brake is 44.5 inches, with the 24-inch barrel making up the majority of that length. The length of pull is a standard 13.5 inches, and the barrel has a 1:9-inch twist rate specifically optimized for stabilizing heavier, higher-BC .30 caliber projectiles like the 200-grain ELD-X that perform best at magnum velocities.
Who is this NOT for?
This is a poor choice for a first-time rifle buyer or someone primarily target shooting at a bench. The lightweight magnum combination results in significant, sharp recoil—even with the radial brake—that can develop a flinch in inexperienced shooters. It's also not for those uninterested in handloading; factory .300 Win Mag ammunition is expensive, and the rifle's full accuracy potential is unlocked through meticulous load development, a process that requires specific tools and knowledge.
What’s in the box?
You receive the complete rifle, one detachable 3-round speed-box magazine, the factory-installed radial muzzle brake, and the necessary paperwork, including the manufacturer's manual and safety and warranty information. Unlike some competitors, it does not include a scope mount, optic, case, or bore-cleaning supplies; you're buying the bare rifle, which aligns with the expectations of experienced shooters who have specific mounting and accessory preferences. Budget an additional $400-800 for a quality scope mount and rings suited to a magnum's recoil impulse.
Is the CT Rage worth it at $3,399?
If your hunting strategy demands a rifle that weighs under 6.5 lbs yet can ethically anchor a bull elk at 700 yards, it is worth every penny. This price buys you a titanium action and a proprietary carbon-wrapped barrel, two technologies that directly combat weight without sacrificing barrel harmonics or action strength. For a casual hunter content with a standard 8-9 lb rifle in a milder caliber like .308 or 6.5 Creedmoor, the value proposition collapses; there are competent options like the Stevens 334 .243 Win 20″ Bolt-Action Rifle — our editorial take for less than a third of the cost. This rifle is a specialized tool, and you're paying for the engineering that went into saving those pounds where they matter most—on the move.
Specs at a glance
Pros & cons
What works
- Weighs 6.10 lbs — nearly 3 lbs lighter than a comparable all-steel magnum rifle like the Bergara B-14 HMR.
- Titanium 3-lug action provides corrosion resistance and significant weight savings over chromoly steel.
- Carbon fiber barrel dissipates heat faster than steel, allowing for more consistent shot strings during load development.
Trade-offs
- Proprietary magazine system limits aftermarket options and replacement cost is high (~$85 per mag).
- Sharp recoil impulse due to minimal mass; requires disciplined form or a suppressor to manage effectively.
- Fixed, non-adjustable stock may not fit shooters with non-standard length of pull without permanent modification.
Key attributes
| upc | 853418436448 |
| manufacturer | Fierce Firearms |
| manufacturer part number | FCTRG300WIN24BBO |
| action | Bolt Long Action |
| barrel length | 24" |
| caliber/gauge | .300 Winchester Magnum |
| capacity | 3 + 1 |
| safety | 3 Position |
Frequently asked questions
- What is the thread pitch for the muzzle?
- The 24-inch carbon fiber barrel is threaded 5/8-24 UNEF. This is the standard thread pitch for .30 caliber muzzle devices, making it directly compatible with nearly all .30 cal suppressors and brakes from companies like SilencerCo, Dead Air, and SureFire without requiring an adapter.
- Is the magazine proprietary?
- Yes, it uses Fierce's proprietary detachable speed-box magazine. The capacity is 3+1 rounds of .300 Winchester Magnum. While reliable, replacements must be sourced directly from Fierce Firearms or authorized dealers and typically cost between $75 and $95 each.
- Can the stock be swapped for an adjustable chassis?
- No, not without significant gunsmithing. The Fierce Tech C3 stock is a fixed, integrally-bedded Monte Carlo design. The action is inlet specifically for it, unlike a Remington 700 footprint which has vast aftermarket support. Your stock options are essentially what Fierce offers from the factory.
- Does it come with an optic rail installed?
- No, the rifle ships without any optic mounting system. The receiver is drilled and tapped for a standard Remington 700-pattern scope base, which you must purchase separately. I recommend a high-quality, one-piece Picatinny rail from Seekins Precision or Nightforce, torqued to 25 in-lbs with blue Loctite.