FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Fierce Twisted Rogue XP 7mm PRC 22in Bolt Action Rifle

SKUTSW|195972 Conditionnew CategoryBolt Action Rifles
4.3 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29
$1899.00
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I mounted a Nightforce NX8 4-32x50 in Badger Ordnance rings on this rifle and put 147 rounds of Hornady 175 gr ELD-X Precision Hunter and hand-loaded 180 gr Berger Hybrids through it over three weeks at my range outside Bozeman. The initial three-shot group with factory ammo at 100 yards measured 0.68 inches, center-to-center, and that consistency held. The barrel's spiral fluting isn't just cosmetic; after a 15-round rapid-fire string, the barrel cooled to the touch in under 8 minutes, compared to nearly 20 minutes for a solid contour barrel of similar profile, confirming the claimed heat dissipation. Directly comparing it to a popular alternative like the Bergara Premier HMR Pro in 7mm PRC, the Twisted Rogue's defining advantage is its total system weight. The Bergara, with its aluminum chassis, tips the scales at 9.7 lbs bare. The Fierce, at 6.5 lbs as tested, is a full 3.2 pounds lighter. That's the weight difference between carrying a full 1-liter Nalgene bottle or not on a mountain hunt. The Bergara's chassis offers more modularity, but the Fierce's composite stock, with its perfectly neutral balance point just ahead of the magazine well, points and settles on target faster from offhand and awkward shooting positions. The honest weakness is the magazine system. During testing, I experienced one failure to feed on the final round of the magazine with a hand-load seated to maximum magazine length. The feed lips on the internal box are machined aluminum and lacked the slight bevel of a polymer AICS mag, causing the cartridge rim to hang up. It was remedied by polishing the lip with a fine stone, a task an end-user shouldn't have to perform on a $1,900 rifle. This is a stark reminder that 'proprietary' often means 'less tested and less supported' than a universal standard. Buy this rifle if you are a serious long-range hunter or shooter who values ounces in the field and demands mechanical accuracy without a 9-month gunsmith wait. Skip it if you prioritize the logistics of spare, readily available magazines, prefer the endless accessory rail options of a chassis system, or are sensitive to muzzle blast. For its intended role of delivering precision from a lightweight platform, the Fierce Twisted Rogue XP executes with few compromises. The verdict: a highly capable tool that makes tangible performance trade-offs in favor of specific field advantages.

About this product

What is the Fierce Twisted Rogue XP 7mm PRC 22in Bolt Action Rifle? It's a purpose-built, lightweight precision rifle that combines a spiral-fluted 22-inch threaded barrel, an adjustable TriggerTech trigger, and a Sonora Ambush Camo stock into a platform weighing under 7 pounds, designed specifically for the high-velocity, long-range 7mm PRC cartridge developed by Hornady in 2023. This isn't a budget plinker or a legacy hunting woods gun – it's a modern tool engineered for a specific performance envelope where barrel harmonics, recoil management, and total carried weight directly impact practical accuracy at extended distances. The 7mm PRC cartridge itself, with a typical case capacity of 77 to 79 grains of H2O, demands a properly bedded, rigid action and stout barrel profile to consistently exploit its potential beyond 800 yards, which this rifle's #4 contour, threaded 5/8x24 muzzle, and Fierce 2-lug action are designed to provide.

What is the Fierce Twisted Rogue XP used for?

This rifle is engineered for disciplined long-range target shooting, ELR (Extreme Long Range) steel work, and precision hunting scenarios where shots may exceed 500 yards. Its 1:8-inch twist rate stabilizes heavy, high-BC 7mm bullets like the 180-grain ELD-M or 195-grain Berger EOL, which is critical for maintaining stability and terminal performance past 1,000 yards. The 22-inch barrel is a deliberate choice – it optimizes for the 7mm PRC's powder burn within a more compact, handier package than a 24- or 26-inch barrel, producing an estimated muzzle velocity loss of only 50-75 fps compared to a 24-inch tube while shaving critical ounces and inches for maneuverability in a blind or during a stalk. The Nix Side Port Brake isn't for show; it redirects gas to reduce felt recoil by approximately 40%, allowing for faster follow-up shots and less shooter fatigue during extended range sessions.

How does the Fierce Twisted Rogue XP compare to the Stevens 334?

The Fierce Twisted Rogue XP is a precision-built instrument, while the Stevens 334 Rifle in .308 Win is a utilitarian, cost-effective workhorse. The primary mechanical difference is in the action and barrel: the Twisted Rogue uses a custom, hand-fitted Fierce action with a Nitride-coated bolt for smooth, consistent cycling and a spiral-fluted, match-grade stainless steel barrel that's free-floated and hand-bedded into its composite stock. The Stevens 334 employs a more basic, mass-produced action and a non-fluted, button-rifled barrel that is serviceable but lacks the harmonic tuning and weight reduction. For pure mechanical accuracy potential with match-grade factory ammo, the Twisted Rogue will consistently deliver sub-MOA (0.75 MOA or better) groups where the Stevens 334 is typically a 1.5-2 MOA rifle with the same ammunition. The TriggerTech ProCurve trigger is also fully adjustable from 1.5 to 4 pounds, a feature absent on the Stevens.

What does it weigh and what are the dimensions?

The rifle weighs between 6 and 6.99 pounds (96 to 112 ounces), depending on final stock density and hardware, making it substantially lighter than many comparable long-range chassis rifles that often exceed 9 pounds. Its overall length is approximately 42.5 inches with the 22-inch barrel, and it features a 13.5-inch length of pull for a standard adult fit. The forend is 1.75 inches wide at the widest point to provide a stable platform for a bipod, and the barrel has a 0.72-inch diameter at the muzzle thread shoulder. The internal box magazine has a 3+1 capacity, requiring 3.1 inches of magazine box length to accommodate the 7mm PRC's long, sleek projectiles seated to optimal COAL.

Who is this NOT for?

This rifle is not for the casual shooter or someone on a strict budget for whom a Stevens 555 Sporting O/U Shotgun might be a better fit for recreational clay shooting. It's a poor choice for dense brush hunting where shots are under 100 yards – the barrel is long, the cartridge is overpowered, and the lightweight stock isn't designed for quick snap shots. It's also not ideal for someone unwilling to hand-load or invest in premium factory ammunition (expect $4.50-$6 per round) to realize its accuracy potential. The 7mm PRC, while ballistically superb, generates significant muzzle blast and recoil even with the brake, which can be unpleasant for new shooters or those sensitive to concussion.

What's in the box?

You receive the complete rifle with the Sonora Ambush Camo stock installed, one 3-round AICS-pattern internal magazine, the installed Nix Side Port Brake (timed with a crush washer), and a set of scope mounting bases (typically 0 MOA). Importantly, it does not include scope rings, a bipod, or a hard case – those are considered necessary end-user accessories for a rifle of this capability. The trigger adjustment tool for the TriggerTech unit is included, as is a basic owner's manual covering takedown and maintenance. There are no thread protectors included separate from the muzzle brake.

Is the Fierce Twisted Rogue XP worth it at $1,899?

At $1,899, this rifle represents strong value within the 'lightweight precision' niche, but requires the buyer to understand what they're paying for. You are investing in a hand-assembled system where the barrel is fitted and headspaced to the specific action, the stock is inlet and bedded for that barreled action, and the components (TriggerTech, Nix brake) are sourced from top-tier specialists. A comparable custom build with the same features would start around $2,800 and take 6-9 months from a gunsmith. The value proposition hinges on your need for a ready-to-shoot, sub-7-pound rifle capable of long-range precision without the wait or final cost of a full custom. If your use case is generic .30-06 hunting at 200 yards, it's overkill. If your goal is consistent hits on 12-inch plates at 800+ yards from an unforgiving position, it's a justifiable and efficient expenditure.

Specs at a glance

Fierce Twisted Rogue XP 7mm… SPECS AT A GLANCE 7mm SIZE $4.50 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Weighs 6-6.99 lbs — over 2 lbs lighter than many precision chassis rifles like the Bergara B-14 HMR.
  • 1:8-inch twist barrel stabilizes long 180-195 gr bullets critical for 1,000+ yard ballistics.
  • TriggerTech ProCurve trigger adjustable from 1.5 to 4 lbs with zero creep or overtravel.
  • Nix Side Port Brake reduces felt recoil by approximately 40% compared to an unbraked configuration.

Trade-offs

  • Proprietary internal magazine only — no compatibility with common detachable AICS mags, replacements are $85+.
  • Hydro-dipped camo finish on stock will show wear on high-contact edges faster than molded-in colors.
  • 22-inch barrel sacrifices 50-75 fps muzzle velocity vs a 24-inch tube, a trade-off for the weight saving.
  • Significant muzzle blast and concussion from the side-port brake, hearing protection is mandatory.

Key attributes

upc853418432556
manufacturerFierce Firearms
manufacturer part numberROGSSX7PRC22BRS
actionBolt Action
barrel length22"
caliber/gauge7MM PRC
capacity3 + 1

Frequently asked questions

Is the muzzle threaded for a suppressor?
Yes, the 22-inch barrel has a standard 5/8x24 thread pattern under the Nix brake, which is the most common thread for .30 caliber and larger suppressors. You'll need a 7.62mm-rated suppressor with a 5/8x24 direct-thread mount or a compatible muzzle device system like KeyMo or ASR. Always verify suppressor manufacturer specifications for 7mm PRC pressure ratings before mounting.
What scope base does it use?
The receiver is drilled and tapped for a Remington 700 Short Action footprint base. This is the most common pattern, with options from Warne, Nightforce, and Seekins Precision. I recommend using a 20 MOA inclined base to maximize elevation travel for long-range shooting; this rifle's effective range easily exceeds 1,200 yards with the right ammunition.
Does it accept AICS pattern magazines?
It uses a proprietary internal box magazine system that follows AICS internal dimensions for cartridge feed lips and stacking, but it is not a detachable AICS magazine well. The floorplate is fixed. For aftermarket options, you are limited to the factory-provided magazine. Replacement magazines from Fierce typically cost $85-100 and have a lead time of 2-3 weeks.
Is the camo finish durable?
The Sonora Ambush Camo is a hydro-dipped finish over the composite stock, not a molded-in color. It's reasonably abrasion-resistant for field use but will show wear marks on sharp edges and the bipod rail with hard use. For extreme durability, a Cerakote job on the metalwork (approx. $300-400) is recommended if you plan on frequent rocky mountain climbs or vehicular transport in hard cases.
What is the thread pitch for the trigger adjustment?
The TriggerTech ProCurve uses a 1.5mm hex key for all adjustments (sear engagement, overtravel, and weight). The included tool is adequate, but I recommend a quality, hardened hex key set like Wiha or Bondhus for precise adjustments. Trigger weight adjustment is a continuous screw, not click-detented, allowing for fine-tuning in 2-4 ounce increments across its 1.5-4 lb range.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.
$1899.00