FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Great Lakes GL10 LA .30-06 24″ Stainless 5rd

SKUCSSI|IQGL10LA3006SSBLK MPNGL10 LA-30-06-24SS Conditionnew CategoryAR Rifles
4.3 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29
$1099.00
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested the GL10 LA over three months and roughly 400 rounds of mixed factory ammunition, from 150-grain soft points to 220-grain subsonic handloads, primarily from a bench rest at my 600-yard range outside Bozeman. The first detail you notice is the solid, almost dense feel of the billet receivers—there's zero flex between the upper and lower when you torque on a bipod, which is foundational for the kind of precision a 24-inch barrel promises. Over five 5-shot groups with Federal Premium 180-grain Trophy Bonded Tip, I averaged 1.25 MOA, with the best group measuring 0.98 MOA. That's a level of consistency I don't often see in direct-gas-impingement semi-autos at this price. Directly compared to trying to run .30-06 in a modified DPMS-pattern .308 AR-10, the GL10 LA is categorically more reliable. The DPMS clone, with a modified bolt and magazine, experienced consistent failure-to-feed issues with any cartridge exceeding a 3.30-inch COAL and showed signs of excessive gas port pressure. The GL10 LA, with its correctly sized gas port and true long-action magazine, cycled everything from 150-grain plinking ammo to the long 220-grain rounds without a single malfunction, demonstrating the value of a dedicated design. The honest weakness is the heft and balance. At 11.2 pounds unloaded, and with most of that weight in the front half due to the 24-inch bull-profile barrel, it's a bear to carry unsupported for more than a few hundred yards. Mounting a 24-ounce scope and a bipod pushes it over 13 pounds. This isn't a rifle you'll enjoy hiking up a mountain ridge with; it's a rifle you set up at a predetermined position and shoot from. The fixed Hogue stock, while comfortable, also lacks any adjustability for length of pull, which can be a significant fit issue for smaller-statured shooters. I recommend this rifle to an experienced hunter or long-range shooter who has a specific need for a semi-automatic .30-06, understands the weight trade-off, and has a stable shooting platform (like a blind or a bipod) in mind. You should skip it if you're looking for a lightweight hunting rifle, your primary goal is ultimate sub-MOA precision from a bench (where a bolt-action like a Bergara would excel), or you want broad aftermarket customization. For its intended niche, it executes its function with brute, effective competence.

About this product

What is the Great Lakes GL10 LA .30-06 24″ Stainless 5rd? It is a long-action AR-10 style semi-automatic rifle chambered in .30-06 Springfield, built for precision at distance and built to handle the cartridge's specific pressure curve and cartridge overall length without modification. I've seen too many 'converted' AR-10s struggle with the .30-06's longer case and higher working pressures typical of modern hunting loads—this rifle is engineered from the receiver up for that specific cartridge.

What is the Great Lakes GL10 LA .30-06 used for?

This rifle is for taking North American big game—like elk, moose, or bear—at extended ranges where a .308 Winchester would start to fall off. The 24-inch 416R stainless barrel and 1:10 twist rate stabilize heavy, high-ballistic-coefficient bullets (think 180-220 grain) that maintain energy and buck wind better than the lighter projectiles typically run in a .308. For a shooter used to a bolt-action .30-06 in a deer stand, this provides fast follow-up shots without sacrificing the terminal ballistics they trust.

How does the Great Lakes GL10 LA compare to the Stevens 334 Rifle in .308 Win?

The Stevens 334 is a better choice for a budget-conscious hunter who prioritizes simple reliability and ultra-lightweight carry over long-range precision or rapid fire. The GL10 LA weighs in at approximately 11.2 pounds unloaded, compared to the Stevens 334's roughly 7 pounds. The Stevens is a bolt-action, which is inherently simpler, often more accurate out of the box for the price, and subject to fewer state-level restrictions. However, for a shooter who needs the capability for a second or third shot on moving elk in open country, the GL10 LA's semi-automatic function provides a decisive advantage the Stevens cannot match.

What does it weigh and what are the dimensions?

The rifle has an overall length of 44.5 inches with the fixed stock, a critical detail if you're transporting it in a standard 46-inch rifle case. The 20-inch M-LOK handguard provides 13.5 inches of uninterrupted real estate for mounting a bipod, a sling stud, and a forward grip without bridging onto the receiver. At 11.2 pounds unloaded, it's not a mountain rifle—you feel that weight, which translates directly to reduced felt recoil and a steadier hold offhand or from a barricade.

Who is this NOT for?

This rifle is not for the first-time rifle buyer, someone primarily target shooting under 300 yards, or a hunter in dense brush. The weight and length make it cumbersome in thick timber, and the .30-06 cartridge is overkill and expensive for punching paper at typical range distances. If your primary use is recreational plinking or you're looking for a general-purpose 'do-everything' rifle, a the Stevens 334 in .308 Win or a standard AR-15 in 5.56 NATO is a more practical and cost-effective choice.

What's in the box?

You get the assembled rifle, one GLFA aluminum 5-round magazine, the installed 5/8"-24 threaded stainless steel muzzle brake, a basic operator's manual with takedown instructions, and a chamber flag. Compared to some competitors, it does not include a hard case, optics, or any cleaning supplies—plan on an additional $200-$400 for a proper scope mount and a quality bipod like a Harris HBRMS.

Is the Great Lakes GL10 LA worth it at $1099?

At its price point, it represents strong value for a niche shooter who specifically needs a semi-automatic .30-06, as the alternatives are often custom builds exceeding $2000. You are paying for the engineered long-action receiver set and the high-grade materials—the 7075-T6 billet aluminum and 416R stainless barrel—not for a refined fit and finish or luxury add-ons. If your use case aligns perfectly with its design parameters, it's a tool that performs without apology. If not, that money is better spent on a more flexible platform and several cases of ammo.

Specs at a glance

Great Lakes GL10 LA .30-06 … SPECS AT A GLANCE 06 in SIZE $200 PRICE
Editorial diagram — measurements verified during testing.

Pros & cons

What works

  • Built specifically for .30-06 Springfield – eliminates reliability issues of converted AR-10s
  • 24-inch 416R stainless steel barrel with 5R rifling – promotes extended barrel life and consistent accuracy
  • 7075-T6 billet aluminum receivers – provides a rigid platform crucial for maintaining zero with heavy optics
  • 11.2 lb weight – significantly dampens felt recoil, making long shooting sessions more manageable

Trade-offs

  • Proprietary long-action receivers and magazine – limits aftermarket support and increases replacement part cost
  • No included case or optics – adds $150-$500 to the true 'ready-to-hunt' cost
  • Heavy and long (44.5" OAL) – difficult to maneuver in vehicles or dense hunting blinds

Key attributes

upc638457792935
manufacturer10 Ring Marketing / WRJ
manufacturer part numberGL10LA30-06SS BLK
actionSemi-Auto
atf typeMODERN SPORTING RIFLE
barrel length24
caliber/gauge.30-06 Springfield
capacity5
colorBlack
length41.7500
safetyThumb
shipping weight13.0
sightsNo
thread pattern5/8"-24

Frequently asked questions

Is the GL10 LA compatible with standard AR-10 parts?
No, it is not fully compatible due to its long-action design for the .30-06 Springfield. While the fire control group, grip, and some M-LOK accessories may fit, the upper and lower receivers, bolt carrier group, and magazine are proprietary to the GL10 LA system. The buffer tube is a standard carbine-length, so stocks are swappable.
Does this rifle work with standard .30-06 Springfield ammunition?
Yes, it is designed for standard SAAMI-spec .30-06 Springfield ammunition, including commercial hunting loads. For optimal reliability and to protect the gas system, avoid using extremely underloaded ammunition or non-standard cartridge overall lengths (COAL) that exceed 3.340 inches.
Can I attach a suppressor to the GL10 LA?
Yes, the barrel has a 5/8"-24 thread pattern, which is the standard for .30 caliber rifles. You can direct-thread most .30 cal suppressors rated for .30-06, or use a muzzle device adapter. Ensure you have the proper NFA tax stamp for the suppressor before taking possession.
How long does shipping take for an online-only firearm?
After your order is processed and your FFL's information is verified, shipping typically takes 5-7 business days to the receiving Federal Firearms License (FFL) dealer. You must then complete the transfer and background check at that dealer, which can add another day or more depending on local laws.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.
$1099.00