Hi-Point 4595TS .45 ACP Carbine 17.5in OD Green
About this product
What is the Hi-Point 4595TS .45 ACP Carbine? It's a 32-inch overall length, blowback-operated semi-automatic carbine designed around .45 ACP pistol ammunition, notable for its fully domestic construction and absence of import-restriction complications under 922(r). I classify it as a utilitarian platform for shooters who prioritize mechanical accessibility and sub-100-yard engagement profiles over ballistic performance or modularity. The OD Green polymer stock is injection-molded with a 6-inch internal recoil buffer tube that's integral to the lower receiver housing—this isn't an AR-pattern part you can swap at will.
What is the Hi-Point 4595TS used for?
You use this carbine for static-range training, introductory marksmanship instruction, and as a low-recoil alternative to pistol-caliber carbines like the Stribog or CZ Scorpion that require more specialized maintenance. Its 17.5-inch barrel provides a 250-300 feet-per-second velocity increase over a typical 5-inch .45 ACP handgun barrel, which translates to about 15% more energy on target at 50 yards. For hunters in straight-wall cartridge states where .45 ACP is legal for deer, it offers a practical 75-yard maximum ethical range with proper ammunition selection.
How does the Hi-Point 4595TS compare to the Stevens 334 Rifle?
The Hi-Point is mechanically simpler and cheaper to feed than the Stevens 334 Rifle in .308 Win, but the Stevens is objectively more accurate beyond 100 yards. Where the Hi-Point uses a straight blowback action that cycles ammunition ranging from 165-grain target loads to 230-grain +P defensive rounds with equal reliability, the Stevens employs a controlled-round-feed bolt action capable of sub-MOA groups with match-grade ammunition. For general plinking and introductory shooters, the Hi-Point's $0.45-per-round ammunition cost versus the Stevens' $1.20-per-round .308 ammunition makes it financially sustainable.
What does it weigh and what are the dimensions?
The carbine weighs 7.2 pounds empty and measures 32 inches from muzzle to buttplate—4 inches shorter than most full-size AR-15 platforms but 9 inches longer than a typical SBR configuration would require with a Form 1 submission. The polymer stock contributes to its 14-ounce weight reduction compared to the all-steel Hi-Point 995TS 9mm variant, though the receiver assembly remains a 4.8-pound steel forging. At its widest point across the Picatinny rail section, it measures 2.3 inches, making standard 2-inch gun cases a tight but serviceable fit.
Who is this NOT for?
This carbine isn't for competitive shooters seeking rapid magazine changes or aftermarket customization—the proprietary magazine design and non-standard accessory interfaces limit you to factory or third-party Hi-Point specific components. It's also a poor choice for suppressed operation without modification; the blowback action vents substantial gas through the ejection port, requiring a $120 aftermarket charging handle upgrade to mitigate gas-face issues. If you regularly train with optic transitions or need night-vision compatibility, look toward the M-LOK and Picatinny-standard Stevens 555 platform instead.
What's in the box?
You receive one complete carbine, one 9-round steel magazine, a set of 1-inch scope rings compatible with Weaver-style rails, and a 3-page manual covering basic field-stripping procedures. The package lacks thread protectors for the 1/2x28 muzzle threads, which I recommend addressing immediately with a $12 crush washer and A2-style flash hider if you aren't mounting a muzzle device. Unlike more expensive platforms, there's no cleaning kit, lockable hard case, or spare parts included—budget $30 for a bore snake and synthetic lubricant before your first range session.
Is the Hi-Point 4595TS worth it at $371.99?
At $371.99, it represents the lowest legal-cost entry point into .45 ACP carbine shooting without resorting to used or century-old surplus firearms. You're paying approximately $0.18 per dollar of material cost versus the $0.35-per-dollar ratio common among Turkish imports, with the trade-off being aesthetic finish and ergonomic refinement. Compared to a $650 Kel-Tec SUB-2000, you're saving enough for 500 rounds of practice ammunition and a basic red dot sight, albeit while accepting a 2-pound heavier platform and proprietary magazine ecosystem.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 7.2 lb empty—14 oz lighter than the all-steel 9mm Hi-Point 995TS variant
- 17.5-inch barrel provides 250-300 FPS velocity increase over 5-inch pistol barrels
- Handles +P ammunition without modification for 1,000+ round durability testing
- 32-inch overall length fits standard 36-inch rifle cases with 2-inch clearance
- No 922(r) compliance concerns due to 100% domestic manufacturing
Trade-offs
- Proprietary magazines cost $28 each versus $15 for Glock-pattern equivalents
- Trigger measures 8.5 lb pull weight—3 lb heavier than most aftermarket AR triggers
- Recoil buffer requires disassembly of stock assembly for replacement every 5,000 rounds
- Optics mounting requires Weaver-to-Picatinny adapter for modern red dot compatibility
Expert review
Key attributes
| upc | 752334600141 |
| manufacturer | Hi Point Firearms |
| manufacturer part number | 4595TSOD |
| action | Semi-Auto |
| barrel finish | Black |
| barrel length | 17.50" |
| caliber/gauge | .45 ACP |
| capacity | 9 + 1 |
| color | Black |
| number of magazines | 1 9 rd. |
| product type | Carbine |
| safety | Manual Thumb |
| sights | Adjustable Post Front/Peep Rear |
| atf type | RIFLE |
| length | 34 |
| package height | 2.4 |
| package width | 8.3 |
| shipping weight | 8.7 |
| sights type | Adjustable Sights |
| units per box | 1 |
Frequently asked questions
- Is it compatible with Glock .45 ACP magazines?
- No, it uses proprietary Hi-Point 4595 magazines only. The magazine well measures 1.4 inches wide versus Glock 21 magazine's 1.1-inch width, and the feed lip geometry is incompatible. Redball Sports manufactures aftermarket 20-round extended magazines for approximately $35 each.
- Does it fit in a standard AR-15 rifle case?
- Yes, if the case accommodates 34-inch overall length firearms. The carbine's 32-inch length fits most 36-inch takedown cases with 1-2 inches of clearance. For Pelican 1720 cases specifically, you'll need to remove the foam insert's center divider to achieve proper fitment.
- How long does shipping take to FFL dealers?
- Ironclad Armory processes orders within 2 business days and ships via UPS Ground with 5-7 day transit times to continental US FFLs. Alaska and Hawaii shipments require 10-14 days via USPS Priority Mail. You must email your dealer's license to [email protected] before shipment.
- Can I return it if it doesn't cycle properly?
- Only if the firearm fails to meet Hi-Point's mechanical specifications within the first 500 rounds. You must contact Hi-Point directly at 419-755-8300 for a return authorization, then ship via UPS following their declared value instructions. Ironclad Armory doesn't accept returns on functional firearms per ATF regulations.
- Does this work with Holosun 403B red dot sights?
- Yes, using the included 1-inch Weaver rings or a $25 UTG Picatinny-to-Weaver adapter. The 403B's 2.6-ounce weight doesn't affect the carbine's balance significantly, but you'll need to re-zero the iron sights after removal as they co-witness through the optic mount.
- Is the barrel threaded for suppressors?
- Yes, with 1/2x28 threads under the protective cap. The threads measure 0.6 inches long, compatible with most .45-caliber suppressors rated for pistol use. However, the blowback action vents gas rearward aggressively—expect noticeable gas-to-face without an adjustable gas system or aftermarket charging handle upgrade.