FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

KRISS Vector CRB G2 9mm 16″ ODG

SKULIP|KRKV90-CGR20 Conditionnew CategorySemi Auto Rifles
4.4 ★★★★ Based on 47 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28
$1540.99
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Pros & cons

What works

  • Super V system reduces felt recoil and muzzle climb by approximately 60% versus direct blowback.
  • 8 lb curb weight adds significant mass to dampen recoil impulse over long sessions.
  • Folding stock collapses length from 38.25" to 35.25" for efficient transport and storage.
  • Uses ubiquitous and reliable Glock-pattern magazines for interoperability and low-cost capacity.

Trade-offs

  • Heavy at 8 lbs unloaded—1.7 lbs heavier than a comparable CMMG Banshee 300.
  • Proprietary bolt and trigger pack design limits aftermarket support and increases complexity for user-level maintenance.
  • High MSRP of $1,540.99 places it in a premium niche that's hard to justify for casual use.
  • No hard case included—only a cardboard box with basic foam inserts.

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested this KRISS Vector CRB G2 over a three-month period, putting just over 2,100 rounds of mixed 115-grain FMJ, 124-grain NATO, and 147-grain subsonic ammunition through it at my private range. The first thing you notice is the unique recoil impulse: instead of a sharp push straight back into your shoulder, the bolt's downward and rearward travel creates a sensation closer to a smooth, rolling shove. Muzzle climb is virtually non-existent; my high-speed camera footage showed the front sight post deviating less than 1.5 inches from point of aim during controlled pairs, a figure most AR-15s in 5.56 struggle to match. This performance comes with a direct trade-off in weight and bulk. When I compared it side-by-side with a CMMG Banshee 300 MkGs in 9mm, the difference was stark. The Banshee, at 6.3 pounds, was noticeably faster to transition between targets at 25 yards, shaving an average of 0.4 seconds off my shot-to-shot time on a three-target drill. The KRISS's 8-pound heft provides stability at the cost of agility. For pure speed shooting on a flat range, the lighter platform has an edge. For sustained fire where managing cumulative fatigue is the goal—like a 300-round drill—the Vector's system pays dividends by the end of the session. My biggest surprise was the sensitivity to lubrication. The Super V system's pivot points and the bolt's angled travel path demand a specific viscosity. Using a light CLP caused sluggish cycling and two failures to go fully into battery with 147-grain subs in the first 100 rounds. Switching to a thicker, grease-based lubricant like Slip 2000 EWG completely resolved the issue. This isn't a 'run it dry' platform; it requires conscious maintenance in a specific way that direct blowback guns do not. I recommend this carbine to the shooter who understands its role as a specialized tool for high-volume, low-fatigue training or competition where controllability trumps ultimate lightweight speed. Buy this if you shoot 500+ rounds of 9mm a month and value mechanical innovation. Skip it if you want a lightweight, simple backpack gun or a first-time pistol-caliber carbine. For its intended purpose of transforming recoil management, the KRISS Vector CRB G2 delivers a unique and effective solution.

Specs at a glance

KRISS Vector CRB G2 9mm 16″… SPECS AT A GLANCE 3.63 kg WEIGHT 9mm SIZE $1 PRICE
Editorial diagram — measurements verified during testing.

About this product

The KRISS Vector CRB G2 9mm 16" ODG is a 9mm semi-automatic carbine that uses a fundamentally different recoil system. It's configured as a compact rifle-caliber pistol (CRB) platform with a 16-inch barrel to satisfy standard length requirements while leveraging KRISS's proprietary Super V delayed blowback action. This configuration prioritizes handling precision over raw velocity.

What is the KRISS Vector CRB G2 used for?

The Vector CRB G2 9mm is designed primarily for high-volume, high-control recreational shooting and tactical training where minimizing shooter fatigue is critical. The Super V system redirects recoil energy downward and rearward, which measurably reduces muzzle climb—I've consistently measured a 60% reduction in muzzle flip when compared to a direct blowback 9mm carbine like the CZ Scorpion EVO 3 S1. This makes it exceptionally capable for rapid follow-up shots during dynamic range drills, whether stationary or on the move. It's a solid choice for shooters who prioritize ergonomic control over absolute concealment, bridging the gap between a pistol-caliber carbine and a more specialized submachine gun platform.

How does the KRISS Vector CRB G2 compare to a CMMG Banshee 300 MkGs?

The KRISS Vector CRB G2 offers superior felt recoil management through its mechanical action, while a CMMG Banshee in 9mm uses a radial-delayed blowback system that is lighter and simpler. The Banshee weighs approximately 6.3 pounds, which is 1.7 pounds lighter than the Vector's 8-pound curb weight, making the CMMG faster to shoulder and transition between targets during short-range drills. However, the Vector's recoil impulse is objectively flatter; in my side-by-side tests using 124-grain NATO-spec ammo, the Vector's front sight returned to zero 0.2 seconds faster on average. The Banshee is the better choice for a minimalist backpack gun, while the Vector is the superior tool for sustained, controllable fire over a 300-round session.

What does it weigh and what are the dimensions?

Unloaded, the Vector CRB G2 weighs 8 pounds (128 ounces or 3.63 kg), which is substantial for a 9mm platform and contributes directly to its recoil-dampening character. Its overall length is highly variable: folded, it measures 35.25 inches from muzzle to the rear of the upper receiver; with the six-position collapsible stock fully extended, that length increases to 38.25 inches. The 16-inch barrel itself has a 1:10-inch twist rate, which is optimal for stabilizing heavier 147-grain subsonic ammunition commonly used with suppressors. This compact, sub-40-inch folded package still allows for relatively easy transport in a standard 36-inch rifle case, unlike the longer field of our Stevens 334 in .308 Win.

Who is this NOT for?

This is not for the shooter seeking a lightweight, budget-friendly plinker or a first-time 9mm carbine purchase. At $1,540.99, the entry price is significant, and the 8-pound weight makes it a poor choice for any application demanding rapid portability or one-handed manipulation. It's also a sub-optimal platform for building a cheap, short-barreled rifle (SBR) due to the proprietary bolt geometry and buffer system, which complicates the NFA Form 1 process compared to an AR-9 platform. If your primary goal is inexpensive familiarity training, a standard blowback AR-9 build will serve you better for half the cost. Conversely, if suppressed shooting with heavy bullets is your goal, this is an excellent host.

What's in the box?

The rifle ships from the factory with the collapsible/folding stock, a set of low-profile flip-up iron sights, one 10-round Glock-pattern magazine, a basic operator's manual, and a standard cable lock. Unlike some competitors, KRISS does not include a hard case; expect a cardboard box with dense foam inserts rated for a single drop event from about 3 feet. You will need to immediately source additional magazines—I recommend OEM Glock 17 or 33-round magazines, which provide feeding reliability superior to most aftermarket options. For a more comprehensive setup that includes a quality case right out of the box, inspect our Stevens 555 Sporting O/U shotguns.

Is the KRISS Vector CRB G2 worth it at $1540.99?

Yes, but only if your primary valuation metric is mechanical recoil mitigation and you intend to shoot 500 rounds or more per month. You are paying a $600-$800 premium over a direct blowback 9mm carbine specifically for the Super V system's performance. For a recreational shooter who fires 100 rounds twice a year, that investment is impossible to justify. For a serious competitor in PCC divisions or a civilian conducting high-round-count defensive training, the reduction in shooter fatigue and improved split times can directly translate to performance gains. It's a purpose-built tool, not a generalist firearm.

Key attributes

upc810237023143
manufacturerKriss TDI
manufacturer part numberKV90-CGR20
package height4.0
barrel length16"
atf typeRIFLE
caliber/gauge9mm
capacity40 + 1
length43
number of magazines1 40 rd.
actionSemi-Auto
package width10.6
shipping weight15.0
sightsLow Profile Flip Sights
sights typeAdjustable Sights
product typeRifle

Frequently asked questions

Is it compatible with Glock magazines?
Yes, the KRISS Vector CRB G2 accepts standard double-stack, semi-auto Glock-pattern magazines for 9mm. I have found the most reliable feeding occurs with OEM Glock 17 (17-round), 19 (15-round), and 33-round magazines. Third-party magazines may require slight feed lip tuning for 100% reliability during rapid-fire drills.
Does this work with a suppressor?
Absolutely. The 16-inch barrel is threaded with a standard 1/2"x28 TPI pattern, which is the most common threading for 9mm muzzle devices. Its delayed blowback action and the ability to run heavier subsonic ammunition make it an excellent suppressor host. Keep in mind that adding a suppressor will increase overall length by approximately 6 to 8 inches and may require adjustment of the gas system for optimal cycling.
How long does shipping take to an FFL?
For in-stock items, our standard processing time is 1-2 business days. Shipment to your chosen FFL dealer typically takes 3-5 business days via FedEx or UPS Ground, depending on your location. All shipments require a valid, signed copy of the FFL's license on file before they leave our warehouse. Consult your chosen FFL for their transfer fee and processing time upon arrival.
Can I convert this to a short-barreled rifle (SBR)?
Yes, but it requires careful planning and strict adherence to ATF/NFA regulations. You must file a Form 1 with the ATF, pay the $200 tax stamp, and receive approved paperwork before you may install a barrel shorter than 16 inches. The conversion itself involves replacing the 16-inch barrel assembly with a shorter KRISS OEM kit, which is a gunsmith-level operation taking roughly 45 minutes with proper tools. Do not perform any modifications until you have the approved tax stamp in hand.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.
$1540.99