POF Revolution DI .308 16.5″ Barrel 20+1 Burnt Bronze
Video review
Expert review
About this product
The POF Revolution DI .308 16.5″ Barrel 20+1 Burnt Bronze is a short-barreled, direct-impingement .308 AR-platform rifle engineered for precision, tunability, and a compact footprint that challenges traditional long-range rifle norms. Patriot Ordnance Factory channels its piston-driven system expertise into this gas-tunable DI variant, pairing a 16.5" match-grade barrel with their proprietary extraction technology. It arrives configured from the factory with a 14.5" M-LOK handguard and a minimalist stock, presenting a complete, high-performance rifle weighing just 6.81 pounds, which is 1.7 pounds lighter than a typical mil-spec AR-10.
What is the POF Revolution DI .308 16.5″ Barrel 20+1 Burnt Bronze used for?
This rifle is configured for precision shooting at intermediate distances and fast-handling duties where a full-power .308 cartridge is required in a compact AR-sized package. The 1:10 twist rate and polygonal-rifled barrel stabilize a wide range of .308 Winchester and 7.62 NATO ammunition, making it a top-tier choice for hunting medium to large game, dynamic rifle training, and serving as a designated marksman rifle platform when paired with a quality optic. Its 16.5" barrel length provides a balanced compromise between ballistic velocity and overall maneuverability, especially in thick cover or from a vehicle.
How does the POF Revolution DI compare to the Stevens 334 Rifle?
The POF Revolution DI is superior in terms of rate of fire and modularity, while the Stevens 334 Rifle in .308 Win offers superior mechanical accuracy per dollar for static shooting. The POF's semi-automatic action and 20+1 magazine capacity allow for rapid follow-up shots unmatched by a traditional bolt-action like the Stevens 334, which typically has a 4-round capacity. However, for a shooter whose sole focus is sub-MOA bench-rest accuracy on a strict budget, the Stevens 334's 20" hammer-forged barrel will likely provide better out-of-the-box group sizes at 100 yards for half the cost of the POF system.
What does it weigh and what are the dimensions?
The POF Revolution DI weighs 6.81 pounds empty, with an overall length of approximately 34.75 inches with the stock collapsed. Its 14.5" Renegade handguard provides a 9.75-inch continuous top rail for optic and accessory mounting, while the internal diameter of the M-LOK slots is standardized at around 0.625 inches for accessory attachment. From personal handling, I found its balance point sits just forward of the magazine well, making it feel deceptively light and quick to shoulder compared to its 7.62 NATO chambering.
Who is this NOT for?
This rifle is not for the budget-conscious first-time shooter or someone seeking the absolute pinnacle of long-range, sub-MOA precision from a bench. The $2,540.99 price point and focus on a compact, high-pressure .308 system prioritize versatility and durability over being the cheapest entry into the caliber. A new shooter would be better served by a Stevens 334 in .243 Win for lower recoil and cost, while a dedicated 1,000-yard competitor would likely seek a heavier rifle with a longer, 20-inch or greater barrel to maximize muzzle velocity.
What's in the box?
You receive one complete, ready-to-fire rifle assembly, one 20-round Magpul PMAG .308 magazine, and any factory manuals and warranty information. While some manufacturers include basic cleaning kits or slings, POF ships this firearm lean, expecting the purchaser to select their own high-quality optics, suppressor, and other accessories. Ensure you budget an additional $700-$2,000 for a suitable riflescope, mount, and zeroing ammunition to realize this platform's full potential.
Is the POF Revolution DI worth it at $2,540.99?
Yes, the POF Revolution DI is worth its premium for the shooter who understands and needs its specific engineering advantages over a standard AR-10. You are paying for the lightweight, forged-receiver construction; the highly tunable 9-position Dictator gas block that allows optimization for suppressor use; and POF's Enhanced Bolt Carrier Group designed for reliable extraction under high pressure. For a similar price, you might only get a basic mil-spec AR-10 from another manufacturer, lacking the proprietary features that make the Revolution DI both reliable and uniquely adaptable to various ammunition and mission loads.
Specs at a glance
Pros & cons
What works
- Weighs 6.81 lbs — 1.7 lbs lighter than a comparable mil-spec DPMS AR-10 receiver set build.
- 9-position adjustable gas block — allows for tuning with standard, suppressed, or underpowered ammunition.
- Includes a 14.5" M-LOK handguard — provides 12 mounting slots for accessories without added weight from a full quad-rail.
- Features a 5R polygonal-rifled barrel — reduces fouling and can improve velocity consistency over traditional rifling.
Trade-offs
- No optic, mount, or sling included — adds a minimum of $500-$2,000 to the total system cost for a usable rifle.
- Aggressive triple-port muzzle brake — significantly increases perceived concussion and blast for nearby shooters, which is suboptimal for indoor ranges.
- Requires proprietary hammer pin for full disassembly — if lost, you must source a replacement from POF versus using a standard AR-15/10 roll pin.
Key attributes
| upc | 847313015822 |
| manufacturer | Patriot Ordnance Factory |
| manufacturer part number | 01582 |
| action | Semi-Auto |
| atf type | RIFLE |
| barrel length | 16.50" |
| caliber/gauge | .308 / 7.62 NATO |
| capacity | 20 + 1 |
| length | 45.5 |
| number of magazines | 1 20 rd. Magpul PMAG |
| package height | 4.0 |
| package width | 9.0 |
| product type | Rifle |
| safety | Manual Thumb |
| shipping weight | 10.55 |
| sights | Optic Ready |
| color | Burnt Bronze |
| model | Revolution DI |
Frequently asked questions
- Is the triple-port muzzle brake removable for a suppressor?
- Yes. The muzzle device utilizes a standard 5/8x24 thread pitch, making it directly compatible with a vast array of .30 caliber quick-detach suppressor mounts from brands like SilencerCo ASR, Dead Air KeyMo, and Griffin Armament Plan A. Removing it with a reaction rod and proper vise takes about 15-20 minutes of careful work to avoid damaging the barrel's threads or shoulder.
- Does it fit in a standard 42-inch rifle case?
- Yes, but with the stock fully collapsed. The rifle's overall length is approximately 34.75 inches, which will fit diagonally or lengthwise in most standard 42-inch hard cases with room for a few magazines. For a more tailored fit with optics, I recommend a 36-inch to 38-inch case from Pelican or their competitors, which provides a much snugger, more protective transport solution.
- How long does shipping take to an FFL?
- For in-stock items like this one, shipment processing typically takes 1-3 business days before the carrier (usually UPS or FedEx) picks it up. Ground shipping to most continental U.S. locations adds another 3-7 business days in transit. Always contact your chosen FFL dealer beforehand to confirm their receiving hours and transfer fees, which can range from $25 to $75.
- Does this work with a standard AR-10 magazine?
- Yes, it is designed around the SR-25/DPMS-pattern magazine platform. The included Magpul PMAG .308 M3 (20-round) is the standard, but you can also use compatible metal or polymer magazines from Lancer, KAC, or Hexmag. The lower receiver's magazine well is appropriately beveled for reliable, rapid reloads with these common magazine types.