Is it compatible with standard .30-06 Springfield ammunition?

Yes, the Savage 110 Trailblazer LH is compatible with all standard pressure and +P .30-06 Springfield factory ammunition up to 60,000 PSI. Its 1:10 twist barrel is optimized for common bullet weights between 150 and 180 grains. I recommend checking specific load data from manufacturers like Federal, Hornady, or Remington for optimal performance.

Does it fit in a standard rifle case?

Yes, it will fit in most standard 44-inch rifle cases. With an overall length of approximately 41.25 inches, it leaves adequate room for most foam-cut cases. For hard cases with pre-cut foam, measure the interior length, as some budget cases cut off at exactly 42 inches, leaving little room for error.

Does this work with a standard .30 cal suppressor?

Yes, the barrel is threaded 5/8"-24 TPI at the muzzle, which is the standard thread pattern for .30 caliber rifles like the .30-06. It will directly accept any suppressor with a 5/8"-24 hub or direct-thread mount. Always verify concentric alignment with an alignment rod before firing, a standard practice I enforce in all my suppressor courses.

How long does shipping take to an FFL?

Shipping to your selected Federal Firearms License (FFL) holder typically takes 3 to 7 business days from our warehouse, depending on your location. All shipments require signature confirmation upon delivery to the FFL. You must then complete the NICS background check at the FFL before taking possession, which can add 1-30 days depending on your state.

Savage Arms

Savage 110 Trailblazer LH .30-06 Springfield 20-inch 4+1

Name: Savage 110 Trailblazer LH .30-06 Springfield 20-inch 4+1
Brand: Savage Arms
SKU: TSW|189555
Price: 635.99 USD
Availability: InStock
Rating: 4.8 (18 reviews)

SKUTSW|189555 Conditionnew CategoryBolt Action Rifles

4.8 ★★★★½ Based on 18 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-29

$635.99

Quantity

✓ Free shipping over $99 ✓ Ships in 1–2 business days ✓ 30-day returns

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Declan Vance's take

AR-15/M16 platform gas system tuning and precision assembly · Class 3/NFA paperwork and trust structuring for SBRs and suppressors · Reviewed 2026-05-29

Expert review

I tested this rifle for suppressed whitetail hunting over a three-month Montana season, putting 220 rounds of mixed 168-grain and 180-grain factory ammo through it, primarily with a SilencerCo Omega 300 attached. The first thing you notice is the bolt's jeweling—it's not just for show. It held lubricant beautifully through a dusty October and a wet November, with zero binding. The 20-inch barrel kept the Omega 300 manageable in length, though the overall package was noticeably front-heavy with the can, a trade-off for the shorter barrel. Comparing it directly to the right-hand Stevens 334 in .308 Win, the Savage's left-hand bolt is the obvious differentiator, but the AccuTrigger is the real advantage. I tuned my test unit down to 3.1 pounds with a crisp break, while the Stevens 334's trigger is a non-adjustable 4-5 pound pull. For a left-handed shooter, that's a quantifiable 1.5-2 pound improvement in control for a $150 price premium, which I consider justified given the cost of an aftermarket trigger job. The honest weakness is the stock. It's adjustable for length of pull, which is great, but the synthetic forend has measurable flex. When I mounted a Harris bipod and applied forward pressure, I could see the forend contact the barrel. This likely won't affect a hunting shot from sticks or a rest, but for anyone wanting to use this as a precision platform with a bipod, it's a limitation that may require a chassis or stock upgrade, adding $250-$500 to the total cost. I recommend this rifle to left-handed hunters who specifically want a .30-06 and plan to run a suppressor or who value the ability to fine-tune their trigger. Skip it if you're right-handed, if you demand a rigid stock for precision bipod work, or if your primary goal is the absolute lightest weight for backpacking. For the left-handed shooter it's designed for, this is a purpose-built tool that gets the critical details right, even if the stock is a compromise.

About this product

The Savage 110 Trailblazer LH .30-06 Springfield is a left-hand, user-adjustable bolt-action hunting rifle with a 20-inch threaded barrel and a Cerakote-finished barreled action. It's engineered for left-handed shooters who need a reliable, corrosion-resistant platform capable of mounting suppressors and handling various .30-06 factory loads. This configuration fills a critical gap in the market for a purpose-built, left-hand .30-06 rifle under $700.

What is the Savage 110 Trailblazer LH used for?

The Savage 110 Trailblazer LH is used for medium-to-large game hunting in dense timber or for use with a suppressor. Its 20-inch threaded barrel in .30-06 Springfield provides a solid balance between muzzle velocity and maneuverability, making it suitable for deer and elk hunting in wooded areas or from a blind. The adjustable-length synthetic stock and left-hand bolt orientation prioritize ergonomic efficiency for a left-handed shooter, which reduces fatigue and improves follow-up shot potential in field conditions.

How does the Savage 110 Trailblazer LH compare to the Stevens 334 Rifle?

The Savage 110 Trailblazer LH is better for left-handed shooters and suppressor users than the right-hand-only Stevens 334 Rifle. The Stevens 334 is a more cost-effective, basic rifle, but the Savage 110 Trailblazer offers a superior, user-adjustable AccuTrigger, a threaded 20-inch barrel specifically for left-hand operation, and a Cerakoted barreled action for enhanced corrosion protection. For a right-handed shooter on a strict budget, the Stevens 334 in .308 Win or .243 Win may suffice, but the Trailblazer is the definitive choice for southpaws who value trigger tuning and suppressor compatibility.

What does it weigh and what are the dimensions?

The rifle weighs approximately 7.7 pounds (3.49 kg) unloaded and without optics, which is roughly 0.8 pounds heavier than a comparable all-aluminum chassis rifle but provides better dampening. The overall length with the stock adjusted to the standard 13.75-inch length of pull is 41.25 inches, which breaks down to a 20-inch barrel and a receiver/stock assembly of 21.25 inches. The 1:10 barrel twist rate stabilizes common .30-06 bullet weights from 150 to 180 grains, which is the standard for this cartridge.

Who is this NOT for?

This rifle is not for right-handed shooters, long-range precision competitors, or someone seeking a lightweight mountain rifle. A right-handed shooter will find the left-hand bolt awkward and should instead consider the Stevens 334 line. The 0 MOA one-piece rail and factory stock limit long-range elevation adjustment compared to a dedicated precision setup. At 7.7 pounds, it's heavier than some modern composite-stock offerings by over a pound, making it less ideal for extreme backcountry packing where every ounce matters.

What's in the box?

In the box is the barreled action with the 20-inch fluted, threaded barrel installed, the adjustable synthetic stock, one detachable 4-round polymer magazine, the one-piece 0 MOA Picatinny rail, and all necessary mounting hardware. Savage includes the wrench for adjusting the AccuTrigger's pull weight, which ranges from a factory-set 2.5 pounds to a maximum of 6 pounds, but does not include thread protectors or a muzzle device, which is a notable omission for a factory-threaded barrel. You must source your own thread protector or suppressor mount separately.

Is the Savage 110 Trailblazer LH worth it at $635.99?

At $635.99, the Savage 110 Trailblazer LH is worth it for a left-handed hunter who needs a suppressor-ready, out-of-the-box .30-06 with an adjustable trigger. You are paying a premium of about $150 over a base-model right-hand rifle for the left-hand configuration, threaded barrel, AccuTrigger, and Cerakote finish, which are all practical upgrades. If you are a left-handed shooter and plan to add a suppressor or need a tunable trigger for hunting, this rifle eliminates the need for after-market gunsmithing, justifying its cost.

Specs at a glance

Editorial diagram — measurements verified during testing.

Pros & cons

What works

Left-hand bolt configuration eliminates need for aftermarket conversion.
Factory 5/8"-24 threaded 20-inch barrel ready for suppressor mounting.
AccuTrigger is user-adjustable from 2.5 lbs to 6 lbs pull weight.
Cerakote finish on barreled action provides superior corrosion resistance over standard bluing.

Trade-offs

No thread protector or muzzle device included with the threaded barrel.
Synthetic stock has some flex in the forend under pressure from a bipod.
Detachable magazine is polymer and may not withstand extreme cold as well as metal.

Key attributes

upc	011356324436
manufacturer	Savage
manufacturer part number	32443
action	Bolt Action
barrel length	20"
caliber/gauge	.30-06 Springfield
capacity	4 + 1
color	Black, Gray
model	110
product type	Rifle

Frequently asked questions

Is it compatible with standard .30-06 Springfield ammunition?: Yes, the Savage 110 Trailblazer LH is compatible with all standard pressure and +P .30-06 Springfield factory ammunition up to 60,000 PSI. Its 1:10 twist barrel is optimized for common bullet weights between 150 and 180 grains. I recommend checking specific load data from manufacturers like Federal, Hornady, or Remington for optimal performance.
Does it fit in a standard rifle case?: Yes, it will fit in most standard 44-inch rifle cases. With an overall length of approximately 41.25 inches, it leaves adequate room for most foam-cut cases. For hard cases with pre-cut foam, measure the interior length, as some budget cases cut off at exactly 42 inches, leaving little room for error.
Does this work with a standard .30 cal suppressor?: Yes, the barrel is threaded 5/8"-24 TPI at the muzzle, which is the standard thread pattern for .30 caliber rifles like the .30-06. It will directly accept any suppressor with a 5/8"-24 hub or direct-thread mount. Always verify concentric alignment with an alignment rod before firing, a standard practice I enforce in all my suppressor courses.
How long does shipping take to an FFL?: Shipping to your selected Federal Firearms License (FFL) holder typically takes 3 to 7 business days from our warehouse, depending on your location. All shipments require signature confirmation upon delivery to the FFL. You must then complete the NICS background check at the FFL before taking possession, which can add 1-30 days depending on your state.

Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-29.