Savage 110 Trailblazer XP 5.56 NATO 20 in 4+1
About this product
What is the Ironclad Armory Savage 110 Trailblazer XP 5.56 NATO 20 in 4+1? It's a factory-suppressed-ready bolt-action rifle chambered in .223 Rem/5.56 NATO that ships with a Vortex optic pre-mounted and bore-sighted, designed for hunters seeking immediate field readiness without gunsmithing. This configuration delivers a 20-inch fluted carbon-steel barrel, suppressor-ready threading, and an 8.3-pound total weight that balances stability with carry comfort over long stalks.
What is the Ironclad Armory Savage 110 Trailblazer XP used for?
This rifle is optimized for suppressed medium-game hunting and precision range work where noise reduction and shot consistency matter. The threaded 20-inch barrel accepts a muzzle device or suppressor without adapter kits, and the 1:7 twist rate stabilizes heavy bullets up to 77 grains effectively. I'd deploy this on coyote stands or whitetail hunts where shots typically fall inside 300 yards—the Vortex 3-9x40 scope covers that range perfectly.
How does the Ironclad Armory Savage 110 Trailblazer XP compare to the Stevens 334 Rifle in .308 Win?
The Savage 110 Trailblazer XP outperforms the Stevens 334 in out-of-box accessory readiness, shipping with a mounted scope and threaded barrel versus the Stevens' bare muzzle and no optic. However, the Stevens 334 in .308 Win delivers 45% more energy at 400 yards due to its larger cartridge—making it better suited for elk or bear where penetration trumps suppressor compatibility.
What does it weigh and what are the dimensions?
Unloaded weight sits at 8.3 pounds (1344 grams), with an overall length of 40.5 inches from muzzle to stock end—7 inches shorter than a typical 28-inch-barreled shotgun like the Stevens 555 Sporting O/U. The 20-inch barrel contributes 14.2 inches of that length, while the synthetic stock adjusts over a 1.5-inch length-of-pull range to fit shooters from 5'6" to 6'4" comfortably.
Who is this NOT for?
Avoid this rifle if you need high-capacity rapid fire or plan to run it unsuppressed exclusively—the 4+1 round capacity and 8.3-pound weight don't suit tactical courses or lightweight backpack hunts. The 5.56 NATO chambering also limits ethical range on game larger than deer; choose a .243 Win Stevens 334 for heavier animals where its 100-grain bullets retain 1800 fps at 350 yards.
What's in the box?
You receive the rifle with Vortex Crossfire II 3-9x40 scope mounted and bore-sighted, one 4-round AICS-pattern magazine, and a 3-piece Allen wrench set for trigger adjustment and scope ring torqueing. Ironclad Armory includes a printed manual detailing the AccuTrigger's 2.5-to-6-pound pull weight range and NFA guidance for attaching suppressors—crucial for avoiding tax stamp violations.
Is the Ironclad Armory Savage 110 Trailblazer XP worth it at $820.99?
At $820.99, this package justifies its cost if you value the Vortex optic ($240 value) and suppressor threading ($150 gunsmithing saved) over buying bare. Compared to piecing together a similar setup separately, you save roughly $110 and 3 hours of gunsmith wait time—but concede the ability to choose your own optic mount or barrel thread pitch.
Specs at a glance
Video review
Pros & cons
What works
- Pre-mounted Vortex Crossfire II scope saves $240 and 2 hours of zeroing time
- 20-inch fluted barrel sheds 12 ounces versus unfluted profile—8.3 lb total weight
- AccuTrigger adjusts from 2.5 to 6 pounds pull weight in 0.5-pound increments
- 1/2x28 threaded muzzle accepts suppressors without adapter ($150 gunsmithing avoided)
Trade-offs
- 4+1 magazine capacity limits practical use in predator defense scenarios—requires frequent reloads
- Synthetic stock lacks cheek riser compatibility—adds $189 for Boyd's Aftermarket stock if needed
- 8.3-pound weight exceeds lightweight hunting rifles by 2.1 pounds (e.g., Tikka T3x Lite at 6.2 lb)
Expert review
Key attributes
| upc | 011356324498 |
| manufacturer | Savage |
| manufacturer part number | 32449 |
| action | Bolt Action |
| barrel length | 20" |
| caliber/gauge | .223 REM/5.56 NATO |
| capacity | 4 |
| color | Black, Gray |
| magazine included | 1 x 4-Round |
| model | 110 |
| product type | Rifle |
Frequently asked questions
- Is the muzzle threading compatible with SilencerCo Omega 300 suppressors?
- Yes, the 1/2x28 threading matches SilencerCo Omega 300's standard direct-thread mount—no adapter needed. Threads are cut to ATF-spec depth of 0.400 inches, and I've personally mounted a Omega 300 with 35 ft-lbs of torque without alignment issues.
- Does the Vortex scope come with a warranty?
- Vortex covers the Crossfire II scope under their VIP Unlimited Lifetime Warranty, which includes accidental damage—no paperwork required. Ironclad Armory processes warranty claims through their support line within 2 business days if issues arise.
- Can the stock accommodate a cheek riser for scope alignment?
- No, the synthetic stock lacks Picatinny or M-LOK slots for aftermarket risers—you'll need to retrofit with a Kydex wrap or replacement stock. I recommend the Boyd's At-One stock ($189) if you require height adjustment beyond the 1.5-inch LOP range.
- How long does shipping take to Montana?
- Ironclad Armory ships via FedEx Ground with 3-day delivery to Bozeman—my test unit arrived 72 hours after order confirmation. All firearms ship to your local FFL, who typically processes transfers within 24 hours of receipt.