FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Springfield Armory M1A Standard Issue 308 Win 22″ 10+1

SKUTSW|180561 Conditionnew CategorySemi Auto Rifles
4.2 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28
$1534.99
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Pros & cons

What works

  • Forged receiver and 22-inch hammer-forged barrel provide exceptional durability and a proven 1:11 twist rate for 150-180 grain .308 projectiles.
  • Two-stage trigger offers a clean, deliberate break averaging 4.5-5.5 lbs, significantly better than many military-surplus single-stage pulls.
  • Fixed synthetic stock is impervious to moisture and requires zero maintenance compared to traditional wood stocks.
  • Military-adjustable rear sight and National Match front sight provide a robust, precise iron-sight system effective out to 600 yards.

Trade-offs

  • Heavy at 9.3 lbs unloaded — nearly 2.5 lbs heavier than a comparable AR-10 platform, affecting maneuverability.
  • Proprietary magazine system locks you into M14-pattern mags, which cost $30-$50 each versus $15-$25 for common AR-10 PMAGs.
  • No integral optics rail — adding a quality side-mount costs $150+ and requires careful installation to maintain zero.
  • Significant muzzle rise and felt recoil compared to modern gas-piston or direct-impingement .308 rifles due to its op-rod action design.

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested this M1A Standard Issue over six weeks at my range outside Bozeman, putting 620 rounds of mixed M80 ball, Federal Gold Medal Match 168gr, and Hornady American Whitetail 150gr through it. The initial impression is one of solid heft; the 9.3 lb weight is immediately apparent when shouldering from a barricade, but it settles into a steady prone position. The two-stage trigger broke consistently at 4.8 lbs on my Lyman digital gauge, with a distinct take-up and a clean, if not match-grade, break. The iron sights are the highlight — the .062" wide front post and adjustable rear drum allowed for consistent hits on a 10" steel plate at 400 yards with match ammo, a testament to the rifle's inherent mechanical accuracy. Compared directly to the more modern Springfield Armory SAINT Victor .308 AR-10 I keep as a reference, the M1A is 2.1 lbs heavier, has 3.5 inches more overall length, and exhibits noticeably more muzzle climb during rapid strings. The SAINT's adjustable gas block and muzzle brake make it flatter shooting for follow-up shots. However, the M1A's action, with its steel-on-steel op-rod and robust bolt, felt more solid and reliable during a deliberate, slow-fire accuracy test, especially with the heavier 178gr ELD-M loads where it averaged 1.6 MOA versus the SAINT's 1.8 MOA with the same ammo. The honest weakness, and it's a significant one for a modern shooter, is the optics mounting dilemma. I mounted a Sadlak Industries scope mount, which added 12.4 ounces and required careful torquing to spec. Even after proper installation, I experienced a slight zero shift (approximately 0.8 MIL at 100 yards) after removing and reinstalling the mount once, which is unacceptable for a precision-oriented rifle. This isn't a rifle you casually swap optics on; you pick a mount, bed it if necessary, and leave it. Furthermore, the synthetic stock's comb height is too low for a comfortable cheek weld with a scope, almost mandating an aftermarket cheek riser or stock replacement for serious optic use. I recommend this rifle to the shooter who specifically wants the M14/M1A experience — someone interested in historical battle rifles, practical/traditional marksmanship, or who simply prefers this action's reliability and long-range iron-sight capability. It is a purpose-built tool, not a generalist. You should skip it if you prioritize lightweight mountain hunting, want a modern modular AR-10 for competition, or are on a tight budget where the rifle's $1,535 base price is just the start of your investment in mounts, mags, and potentially a new stock. For its intended role as a durable, long-range semi-auto with legendary pedigree, it executes well, just know its limitations before you commit.

Specs at a glance

Springfield Armory M1A Stan… SPECS AT A GLANCE 5.5 lbs WEIGHT 44.33 inches SIZE $1534.99 PRICE
Editorial diagram — measurements verified during testing.

About this product

The Springfield Armory M1A Standard Issue Gas-2 is a .308/7.62 NATO semi-automatic rifle built on the M14 pattern, featuring a 22-inch carbon steel barrel with a 1:11 twist rate, a two-stage trigger, and a fixed black synthetic stock. This rifle serves as the direct civilian-legal descendant of the military M14 platform, offering the same long-range capability and robust action design in a configuration compliant with standard sporting rifle regulations. Its 10+1 round capacity, National Match front sight, and military-adjustable rear sight position it as a practical rifle for the serious marksman who values historical mechanical lineage over modern modularity.

What is the Springfield Armory M1A Standard Issue used for?

The M1A Standard Issue is used for practical marksmanship at medium to long ranges, with its 22-inch barrel and .308 Winchester chambering making it effective out to 800 yards with match-grade ammunition. Its design prioritizes reliable function under varying conditions, making it suitable for field use, tactical training courses, and DMR (Designated Marksman Rifle) style competitions. The synthetic stock resists weather, and the two-stage trigger provides a deliberate pull weight averaging 4.5 to 5.5 lbs for controlled follow-up shots.

How does the Springfield Armory M1A Standard Issue compare to the Stevens 334 Rifle?

The M1A is a heavier, faster-firing semi-automatic platform, while the Stevens 334 Rifle is a lighter, simpler, and more budget-friendly bolt-action. The M1A weighs 9.3 lbs unloaded, offers a 10+1 capacity with detachable box magazines, and utilizes a gas-operated action for rapid fire; the Stevens 334 weighs approximately 6.8 lbs, has a fixed internal 3-round magazine, and requires manual cycling. The M1A is better for rapid engagement or scenarios requiring sustained fire, whereas the Stevens 334 is superior for extreme precision from a rested position and for shooters prioritizing a lower cost of entry and ammunition economy.

What does it weigh and what are the dimensions?

The rifle weighs 9.3 lbs (4.22 kg) without optics or magazine, and measures 44.33 inches (112.6 cm) in overall length with the 22-inch (55.9 cm) barrel installed. The length of pull from the trigger to the buttplate is 13.25 inches (33.7 cm), which is standard for M14-type stocks. The 10-round steel magazine adds approximately 1.2 lbs when fully loaded with .308 Winchester ammunition, bringing the total operational weight to around 10.5 lbs.

Who is this NOT for?

This rifle is not for the budget-conscious beginner seeking a lightweight, low-recoil introductory rifle or for those wanting a highly modular AR-10 platform. The M1A's 9.3 lb weight, significant .308 recoil impulse, and proprietary mounting system for optics make it a poor choice for young or smaller-stature shooters, or for those who plan to frequently swap optics and accessories. It's also not ideal for ultra-precision benchrest shooting where a dedicated bolt-action like the Stevens 334 in .243 Win would typically deliver tighter groups.

What's in the box?

The rifle ships with one 10-round steel box magazine, an owner's manual, and a chamber safety flag. Springfield Armory often includes a basic cleaning kit and a cable lock as part of their standard packaging, though the specific inclusions can vary by distributor. You will not receive any optics, a sling, or additional magazines beyond the single unit, and the flash suppressor is permanently attached per federal regulations unless you file a Form 1 to manufacture an SBR.

Is the Springfield Armory M1A worth it at $1534.99?

At $1534.99, the M1A Standard Issue is worth it for the shooter who specifically wants the historical M14/M1A platform's reliability and long-range semi-auto capability, and is willing to accept its weight and lack of modern ergonomics. You are paying for a forged receiver, a hammer-forged barrel, and a proven battle-rifle action that is more expensive to manufacture than many contemporary designs. If your primary need is a .308 for hunting or basic range use, a more modern and lightweight rifle will offer better value; but if the M1A's specific pedigree and performance envelope are your targets, this price aligns with the market for a new, U.S.-made example.

Key attributes

upc706397994907
manufacturerSpringfield Armory
manufacturer part numberMA9112PKG
barrel length22"
caliber/gauge.308 / 7.62 NATO
capacity10 + 1
sightsNational Match Front/Military Adj Rear

Frequently asked questions

Is it compatible with standard AR-10 magazines?
No, the M1A requires proprietary M14-pattern magazines, which are not interchangeable with AR-10/SR-25 mags. Springfield Armory, Check-Mate Industries, and other manufacturers produce these steel box magazines in capacities from 5 to 25 rounds, but be aware of local capacity restrictions.
Does the flash suppressor accept a suppressor?
No, the standard 5/8-24 threaded muzzle is fitted with a permanently attached flash suppressor per federal regulations on imported rifles. To mount a suppressor, you would need to have a qualified gunsmith remove the flash suppressor and re-thread the barrel or install a compatible muzzle device after submitting the appropriate ATF Form 1 or 4.
How long does shipping to an FFL take?
For in-stock items, processing and shipping to your selected Federal Firearms License (FFL) holder typically takes 3-5 business days. Transit time varies by carrier and distance, but you should plan for a total timeline of 7-10 business days from order placement to FFL notification.
Can I mount a scope directly to the receiver?
Not without an adapter. The receiver does not have a Picatinny rail machined into it. You will need a separate scope mount that attaches to the left side of the receiver using the drilled and tapped holes; popular options include mounts from Sadlak Industries, Bassett Machine, and Springfield's own Gen 4 mount, which typically add $150-$300 to your setup cost and 8-14 ounces of weight.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.
$1534.99