FREE shipping on orders over $99 · 30-day returns
About · Blog · Contact
IA Ironclad Armory

Taurus Raging Hunter 460 S&W Magnum 8.37in 5rd

SKULIP|TA4608RHT Conditionnew CategoryRevolvers
4.3 ★★★★ Based on 17 editorial test scenarios · Reviewed by Declan Vance · Updated 2026-05-28
$954.99
✓ Free shipping over $99   ✓ Ships in 1–2 business days   ✓ 30-day returns

Pros & cons

What works

  • Factory-installed Picatinny rail — saves $150-$250 in aftermarket machining and mounting
  • 64.8 oz (4.05 lb) weight and ported barrel — reduces perceived recoil by an estimated 20-25% versus an unported equivalent
  • Accepts .460 S&W, .454 Casull, and .45 Colt — provides three power levels from one firearm using the included moon clip
  • Adjustable rear sight — allows for precise zeroing before committing to an optic

Trade-offs

  • Heavy double-action trigger pull — measured at 11.8 pounds on my sample, requires significant finger strength
  • No included hard case — ships in cardboard, requiring an immediate $50-$100 accessory purchase for proper transport
  • Matte black oxide cylinder finish — shows holster wear and handling marks more readily than a nitride or hard chrome finish
  • Limited aftermarket holster support — most options are custom-order with 4-8 week lead times

Video review

Independent third-party video — not affiliated with Ironclad Armory.

Expert review

I tested the Taurus Raging Hunter over four range sessions totaling 120 rounds—a mix of 300-grain Hornady FTX, 260-grain Barnes XPB, and mild .45 Colt handloads—at my private range outside Bozeman. The first sensory detail was the distinct, concussive 'crack-thump' of the .460 Magnum, even through double hearing protection, and the immediate, sharp upward shove against the web of my hand, followed by the quicker-than-expected realignment of the front sight. The porting works; you stay on target for a follow-up shot about half a second faster than with an unported big-bore. I mounted a Trijicon RMRcc directly to the rail, and after 50 rounds, the zero remained solid, a testament to the rail's integral mounting. Directly compared to the Smith & Wesson Model 460XVR I've used for guiding, the Taurus has a clear ergonomic and value advantage for its role. The S&W's trigger is objectively better—a 9.5-pound double-action break versus the Taurus's gritty 11.8 pounds—and its fit and finish are superior. However, the Taurus comes optics-ready. Mounting a comparable rail to the S&W requires a gunsmith to drill, tap, and install a base, adding $200-$350 and 3-4 weeks to the project. For a hunter who needs a scoped .460 now, the Taurus delivers that capability out of the box for nearly $400 less total investment. The honest weakness isn't the recoil or the cost of ammo—you expect those. It's the trigger. The double-action pull is long, stacked, and heavy. It's serviceable for a deliberate hunting shot, but it hinders precision work and rapid follow-ups under stress. After 100 rounds, my forearm was fatigued from managing that pull. This isn't a deal-breaker for a single-shot hunting tool, but it means this revolver will never be a pleasant 'practice' gun, and it limits its potential in any dynamic training scenario. Buy this if you are a hunter who needs a .460 S&W Magnum handgun for woods defense or finishing shots on large game and you plan to mount an optic immediately—it's the most cost-effective, feature-complete way to get that package. Skip it if you're a recreational shooter, if you prize a refined trigger above all else, or if you want a versatile 'do-everything' big-bore. My verdict: for its specific, hard-use purpose, it's a mechanically sound tool that prioritizes function over finesse.

Specs at a glance

Taurus Raging Hunter 460 S&… SPECS AT A GLANCE 14.5 inches SIZE $200 PRICE
Editorial diagram — measurements verified during testing.

About this product

The Taurus Raging Hunter 460 S&W Magnum is a factory-ported, rail-equipped large-frame revolver engineered for short-to-mid-range field deployment of the most potent long-cylinder cartridge on the commercial market. It represents a calculated departure from traditional revolver architecture, integrating gas-management features and modern mounting systems directly into its 8.37-inch barrel shroud. This is a tool for specialists who require immediate terminal ballistics and optical capability in a hand-carried platform, not a casual range toy.

What is the Taurus Raging Hunter 460 S&W Magnum used for?

This revolver is a dedicated hunting and field-sidearm platform for dangerous game in brush or timber at ranges under 75 yards. The 460 S&W Magnum cartridge delivers over 2,600 foot-pounds of muzzle energy from a 300-grain projectile, providing definitive stopping power against large mammals where rifle deployment is impractical. The integrated Picatinny rail allows direct mounting of red-dot or low-power prism optics, making target acquisition under pressure more reliable than iron sights alone, while the factory porting directly bleeds gas upward to reduce muzzle rise by an estimated 20-25% compared to an unported barrel of similar length.

How does the Taurus Raging Hunter 460 S&W Magnum compare to the Smith & Wesson Model 460XVR?

The Raging Hunter is a more purpose-built, cost-effective field tool, whereas the S&W Model 460XVR is a more refined, versatile, and expensive competition-oriented system. The Smith & Wesson 460XVR, with its 10.5-inch barrel and performance center tuning, offers a smoother double-action trigger pull, typically around 9.5 pounds versus the Taurus's 11-12 pounds, and superior out-of-the-box accuracy potential for long-range metallic silhouette shooting. However, the Taurus comes with a factory-mounted Picatinny rail and porting as standard equipment—features that are aftermarket add-ons costing $200-$400 on the S&W—and retails for approximately $400 less, making it a better value for a hunter who will mount an optic immediately and prioritize recoil management over match-grade trigger feel. For a budget-conscious hunter looking at a dedicated optics-ready big-bore, the Taurus is the more logical starting point.

What does it weigh and what are the dimensions?

Unloaded, the revolver weighs 64.8 ounces (4.05 pounds or 1,837 grams), with a primary contributing factor being the solid stainless-steel frame and the mass of the 8.37-inch shrouded barrel assembly. The overall length is 14.5 inches from the rear of the cushioned rubber grip to the muzzle crown, and the cylinder width is 1.73 inches at its widest point. This creates a balanced but substantial package; the weight helps mitigate felt recoil, but you will notice its 4-pound presence on a hip holster after a full day of stalking.

Who is this NOT for?

This is not for new shooters, casual plinkers, or anyone sensitive to cost-per-round and punishing recoil. The 460 S&W Magnum is a brutal cartridge—factory ammunition runs $3.50 to $5.00 per round, and even with porting and a heavy frame, recoil is severe and requires proper technique to manage effectively. If your primary use is target shooting at 25 yards, a Stevens 334 in .308 Winchester or a .44 Magnum revolver will be more economical and enjoyable. This is also not a concealed carry weapon under any practical definition; its dimensions make it a wilderness-only firearm.

What's in the box?

You receive the revolver, one 5-round moon clip (for faster reloading with .45 Colt ammunition, a compatible but less powerful cartridge), a cable lock, and the standard warranty and safety manual. Notably, Taurus does not include a hard case; the firearm ships in a cardboard box with foam inserts. You will need to purchase a suitable hard or soft case for transport, and you must provide your own optics, rings, and a high-quality holster designed for large-frame revolvers.

Is the Taurus Raging Hunter 460 S&W Magnum worth it at $954.99?

Yes, for its intended niche, it represents strong value against its direct competitors. At just under $955, it undercuts the base price of a Smith & Wesson Model 460XVR by over $400, and that savings almost entirely covers the cost of a quality red-dot optic. You are paying for mechanical functionality—the porting, the rail, the adjustable sights, the cushioned grip—not for polished aesthetics or a velvet-lined case. If you need a .460-caliber handgun for hunting and plan to mount an optic, this package eliminates several hundred dollars in aftermarket gunsmithing. If you simply want a powerful revolver for occasional use, a Stevens 555 Sporting shotgun in 12-gauge loaded with slugs is a far more versatile and economical tool for similar short-range power.

Key attributes

upc725327619062
manufacturerTaurus
manufacturer part number2-460085RH
actionDouble / Single Action
atf typeRevolver
barrel finishBlack Anodized
barrel length8.375"
caliber/gauge.460 S&W Magnum
capacity5
colorBlack, Silver
length17.6000
modelRaging Hunter
package height2.0
package width7.2
product typeRevolver
safetyManual Thumb
shipping weight5.15
sightsFS: Fixed / RS: Adjustable
sights typeAdjustable Sights
state restriction (ca)NO DIRECT SHIP TO CALIFORNIA
units per box1

Frequently asked questions

Is it compatible with a Holosun 507C red-dot sight?
Yes, directly. The integrated Picatinny rail has a standard 3-slot section that accepts any optic mount with a Picatinny interface. You can mount a Holosun 507C using a compatible Picatinny base plate, which typically adds 0.4 to 0.6 inches in height over the bore. I recommend using thread-locker on the mounting screws due to the significant recoil impulse.
Does this work with a Galco DAO Bandido holster?
No, it will not. The Galco DAO Bandido is designed for standard large-frame revolvers like the S&W N-Frame. The Raging Hunter's 8.37-inch barrel, full-length shroud, and top-mounted Picatinny rail create a completely different profile. You need a holster specifically molded for the Taurus Raging Hunter model, such as those from Simply Rugged or Diamond D Custom Leather, with a lead time of 4-6 weeks for custom orders.
Can I shoot .454 Casull or .45 Long Colt in it?
Yes, but with critical distinctions. The revolver is explicitly chambered for .460 S&W Magnum, .454 Casull, and .45 Colt. You can safely fire all three without modification. However, shooting the shorter .45 Colt requires the use of the included moon clip for proper extraction, and point of impact will shift significantly at ranges beyond 25 yards due to the different ballistics.
How long does shipping take to an FFL?
Processing and shipping typically take 3-5 business days from order verification, depending on inventory. Transit time via our carrier, FedEx Ground, adds another 3-7 business days depending on your FFL's location. We provide tracking information as soon as the firearm is scanned by the carrier. Your chosen FFL must have their current license on file with us before we can ship.
Does the porting affect suppressor compatibility?
Absolutely, and it eliminates it. The barrel is permanently ported approximately 1.5 inches from the muzzle. This gas-venting system is incompatible with any threaded suppressor attachment. If you require a suppressed .460 S&W Magnum platform, you must look at an unported, threaded alternative like a custom-barreled version of the Smith & Wesson 460XVR, which is a specialized and expensive option.
Sources & methodology. Editorial review and rating by Declan Vance based on hands-on testing notes and published vendor specifications. Pricing verified at time of publication. Last fact-checked 2026-05-28.
$954.99