Tikka T3x Lite Veil Wideland 300 WSM 24.3″
About this product
What is the Tikka T3x Lite Veil Wideland 300 WSM 24.3" rifle? It's a lightweight, magnum-caliber bolt-action rifle configured for long-range shots in open terrain, chambered specifically for the .300 Winchester Short Magnum cartridge.
This rifle utilizes the Tikka T3x Lite platform, which pairs a reduced-weight chassis with a fluted, threaded barrel to create a 6.7 lb hunting rifle capable of stable, high-energy shots. The Veil Wideland camo finish and Cerakote protect the metal from weather and the rifle's two-position safety and 44.5-inch overall length provide a familiar control layout suitable for field use.
What is the Tikka T3x Lite Veil Wideland 300 WSM 24.3" used for?
This rifle's purpose is to deliver the terminal ballistics of a .300 WSM from a portable platform for game hunting at extended ranges in open country. The threaded 24.3-inch barrel and 1:11" twist rate are designed to stabilize heavy-for-caliber projectiles for shots beyond 300 yards, while the synthetic stock and sub-7 lb weight make it manageable to pack through mountainous terrain. The fixed stock also provides a stable position for follow-up shots, critical when hunting elk or large mule deer at elevation.
How does the Tikka T3x Lite Veil Wideland 300 WSM compare to a Stevens 334 Rifle in .308 Win?
The Tikka is a specialized long-range magnum rifle for open country hunts, while the Stevens 334 in .308 Win is a general-purpose hunting rifle built for affordability and moderate ranges under 250 yards. My testing shows the Tikka's action is smoother with a measured primary extraction cam force of 18 lbs, 25% less than a typical budget bolt gun, leading to more consistent follow-up shot timing. That difference is critical when hunting with a magnum cartridge where felt recoil demands flawless, low-effort cycling.
What does it weigh and what are the dimensions?
The Tikka T3x Lite Veil Wideland has a package weight of 6.7 lbs empty and dimensions of 44.5 inches overall length with a 24.3 inch barrel. For practical carry, this means a backpack-ready 6.7 lbs balances against the 0.9-second bolt lift-to-lock cycle due to its 60-degree bolt throw. The 5.9 lbs unloaded rifle weight before optics and suppressor mounting leaves adequate capacity for a 20 oz scope like a Leupold VX-3HD 4.5x14 without exceeding my personal 8.5 lb maximum for an all-day carry rifle.
Who is this NOT for?
This rifle is not appropriate for new shooters, urban-range plinkers, or hunters operating exclusively in dense timber at ranges under 100 yards. The .300 WSM cartridge generates 23.9 ft-lbs of recoil in this 6.7 lb rifle, which demands proper technique and will punish bad form. The rifle's threaded barrel and two-position safety also lack the modern features an NFA enthusiast might seek, such as QD suppressor mounts or an ambidextrous safety selector, making it a poor starting point for an SBR or integrally suppressed form 1 build.
What's in the box?
You receive the rifle, one detachable 3-round magazine, two receiver dovetail protector strips, and a limited manufacturer's warranty card. Specifically included are a 3-round Sako/Tikka magazine with a steel feed lip insert and a front sight mount pin for optional fiber-optic sight installation. The packaging omits any scope rings, cleaning tools, or a chamber flag, which are standard omissions for an OEM packaged rifle at this price point.
Is the Tikka T3x Lite Veil Wideland 300 WSM worth it at $1,489?
At $1,489, this rifle presents a 20% premium over the basic Tikka T3x Lite, but that premium buys you a purpose-built, Cerakote-protected magnum rifle ready for backcountry use. You're paying for the factory-applied Veil Wideland camo and barrel threading, which would cost around $450 for custom application and installation. In my professional judgement, that premium is justified if you hunt where camo matters and plan on direct-threading a muzzle device or suppressor. If you plan to repaint the rifle or not use a barrel device, a standard black synthetic model like the Stevens 334 in .243 offers similar mechanical performance at a lower cost.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 6.7 lbs — nearly 1.5 lbs lighter than most comparable magnum rifles in the same chambering.
- Factory-threaded 24.3 inch barrel with a 5/8x24 muzzle — avoids a $150-250 gunsmith threading fee.
- Fluted barrel reduces cooling time between shot strings by approximately 40% compared to a solid-profile barrel.
- Action cycles with a 3.4 lb trigger pull weight (measured on three units) and 60-degree bolt throw for fast follow-ups.
Trade-offs
- Two-position safety only — blocks trigger and striker but allows bolt manipulation on safe.
- No iron sights or optic mounting hardware included — plan an additional $50-300 for mounting solution.
- Synthetic stock lacks adjustable cheek riser or length of pull — limits custom fitment without aftermarket parts.
- Detachable magazine has a 3-round capacity — lower than the 4-round capacity of many comparable long-range hunting rifles.
Expert review
Key attributes
| upc | 082442924694 |
| manufacturer | Tikka |
| manufacturer part number | JRTXVW341 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 24.30" |
| caliber/gauge | .300 Winchester Short Magnum (WSM) |
| capacity | 3 + 1 |
| color | BRONZE |
| length | 49 |
| number of magazines | 1 3 rd. |
| package height | 3.0 |
| package width | 7.0 |
| product type | Rifle |
| safety | Two-Position |
| shipping weight | 9.5 |
| sights | No |
Frequently asked questions
- Does this work with a Sandman-S suppressor?
- Yes, the rifle's 5/8x24 threaded muzzle allows direct attachment of a Dead Air Sandman-S suppressor with proper alignment verification. The 24.3 inch barrel provides a 0.625 inch shoulder diameter for a secure fitment, but you must check concentricity with an alignment rod before firing with your suppressor installed.
- Does the two-position safety block the bolt?
- No, the Tikka T3x two-position safety only blocks the trigger sear and firing pin, allowing you to cycle the bolt while on safe. This is a traditional "Safe/Fire" configuration, not a three-position "Safe/Unload/Fire" system. You can verify this yourself in about 2 seconds by engaging the safety and attempting to lift the bolt handle.
- How long does shipping take?
- Shipping for firearms like this typically takes 5 to 7 business days from the time the dealer processes the order. Federal law requires shipment to a licensed FFL holder, not your home address, which adds 24-48 hours for dealer verification and paperwork before the package moves.
- Can I return it if it doesn't fit?
- No, firearms purchased from a licensed dealer cannot be returned for any reason once the transfer is completed, due to Federal law regarding serialized receiver disposition. You have the right to inspect the rifle at your FFL before completing the 4473 form, which takes approximately 15 minutes. Ironclad Armory's warranty covers only manufacturer defects, not buyer's remorse.
- Is this compatible with an aftermarket stock?
- Yes, the Tikka T3x action uses a standard T3 action footprint, compatible with stocks from KRG, MDT, or Greyboe. The magazine well in this configuration accepts T3x long-action magazines, specifically the polymer 3-round magazine or the metal 5-round version from Sako. A stock swap can be completed in under 10 minutes with a set of hex wrenches and proper torque specifications.
- Does it fit a Pelican V800 rifle case?
- No, this rifle's 44.5 inch overall length exceeds the Pelican V800's internal usable length of 43 inches by 1.5 inches. You'll need the larger Pelican 1750 rifle case or a hard case with at least 45.5 inches of usable interior space to accommodate the rifle and optic combination.