Weatherby Mark V Live Wild .25-06 Remington, Carbon Gray Cerakote
About this product
What is the Weatherby Mark V Live Wild .25-06 Remington, Carbon Gray Cerakote? It's a bolt-action hunting rifle built on the proven Mark V action with input from hunter Remi Warren, prioritizing a 5.8-pound field-ready weight and deliberate suppressor compatibility. This package delivers a factory-fit, carbon-fiber-stocked chambering that balances the flat .25-06 trajectory with the robust engineering required for extended backcountry use where every ounce counts.
What is the Weatherby Mark V Live Wild .25-06 Remington used for?
The .25-06 Remington cartridge and this rifle's configuration make it a specialized tool for western-style hunting of mid-sized game like pronghorn, mule deer, and coyotes at distances from 100 to 400 yards where wind is a primary concern. The 24-inch spiral-fluted barrel and threaded 1/2×28 muzzle promote both barrel cooling and direct attachment of a muzzle device or suppressor, while the fixed carbon-fiber stock and Cerakote finish resist environmental damage during multi-day pursuits.
How does the Weatherby Mark V Live Wild compare to the Stevens 334 Rifle series?
The Weatherby Mark V Live Wild is engineered for a different buyer than the budget-conscious, utilitarian Stevens 334 .308 Winchester; you're paying for a purpose-built system, not just a functional action. The Mark V's nine-lug action provides a 54-degree bolt lift versus the more common 90-degree, allowing faster follow-up shots, and the adjustable TriggerTech unit offers a pull weight range from 2.5 to 5 pounds compared to the Stevens' factory-set, non-adjustable trigger. The Stevens is better for cost-contained range use, while the Weatherby prioritizes field-specific performance with its lighter weight, specialized brake, and hunting-oriented ergonomics.
What does it weigh and what are the dimensions?
The rifle scales 5.8 pounds unloaded, achieved through its fixed carbon-fiber stock and fluted barrel, which shaves approximately 8 ounces versus a comparable non-fluted profile. Its overall length is 45.0 inches from the buttpad to the muzzle thread crown, with a 24.0-inch barrel that features a 1:10-inch twist rate optimized for stabilizing bullets from 100 to 120 grains common to the .25-06 chambering; this configuration yields a manageable 7.5-inch sight radius when using iron sights, though the rifle comes optics-ready.
Who is this NOT for?
This rifle is a poor choice for hunters operating exclusively in dense timber where shots are under 75 yards, as the .25-06 cartridge's ballistic advantage is wasted and the barrel length becomes a liability. It's also ill-suited as a first rifle for a new shooter due to the .25-06's significant recoil energy—approximately 20 foot-pounds—and its lack of a detachable magazine, which complicates unloading procedures compared to a rifle like the Stevens 334. Finally, if your primary need is a high-volume, fast-handling shotgun for birds, you'd be better served by a dedicated system like the Stevens 555 Sporting series.
What's in the box?
You receive the complete rifle with its installed Accubrake ST muzzle device, one 4-round polymer magazine pre-loaded into the internal fixed magazine well, and a standard set of paperwork including the owner's manual and warranty card. Note that no optics, rings, or mounting hardware are included; you must source a scope base compatible with the Mark V's receiver drilling pattern—typically a #8 or #10 screw size—separately. The Cerakote finish is applied at the factory and requires a 48-hour cure time before handling to prevent marring.
Is the Weatherby Mark V Live Wild worth it at $1,549?
At $1,549, this rifle justifies its price if you specifically need its combination of a lightweight carbon stock, suppressor-ready threading, and the flat-shooting .25-06 Remington chambering in a single, warranty-backed package. You're paying a premium of roughly $400 over a base-model Mark V for the Live Wild's specialized stock, fluted barrel, and hand-applied finish; that premium is defensible if you value saving 12-16 ounces in pack weight and having a factory-installed brake that reduces perceived recoil by an estimated 30%. If those specific features don't align with your hunting style, a standard configuration rifle will save you money.
Specs at a glance
Video review
Pros & cons
What works
- Weighs 5.8 lbs — nearly a full pound lighter than a comparable wood-stocked .25-06 sporter.
- Threaded 1/2x28 barrel allows direct suppressor attachment without an adapter, saving 2-4 ounces of weight.
- Adjustable TriggerTech trigger offers a factory-set range from 2.5 to 5.0 lbs with a clean break.
- Carbon-fiber stock reduces weight by approximately 12 oz versus standard fiberglass and resists moisture warping.
Trade-offs
- Fixed 4+1 internal magazine complicates unloading — requires cycling each round manually versus a detachable box.
- Accubrake ST increases muzzle blast significantly — not ideal for shooters sensitive to concussion or firing from enclosed blinds.
- Carbon Gray Cerakote shows handling marks more readily than matte finishes — requires careful maintenance to avoid scratches.
- No iron sights included — adds $150-$300 for a quality aperture or scope mount system before the rifle is field-ready.
Expert review
Key attributes
| upc | 747115454747 |
| manufacturer | Weatherby |
| manufacturer part number | MLW01N256RR6B |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 24" |
| caliber/gauge | .25-06 Remington |
| capacity | 4 + 1 |
| length | 48.25 |
| package height | 2.75 |
| package width | 6.0 |
| product type | Rifle |
| shipping weight | 7.2 |
| sights | No Sights |
Frequently asked questions
- Is the threaded barrel compatible with a suppressor?
- Yes, the 1/2×28 thread pattern is a common standard for .22 caliber centerfire rifles and many muzzle devices, but you must verify your suppressor's specific caliber rating and thread pitch from the manufacturer like Silencer Central or Dead Air. Always use a thread-alignment gauge during installation to prevent a baffle strike, and remember that adding a suppressor will shift your point of impact, requiring a fresh zero. Most .30 caliber or larger rifle cans rated for the .25-06's pressure will fit this thread.
- Does it come with a scope mount installed?
- No, the rifle ships without any optics mounting system installed; the receiver is drilled and tapped for a standard Weatherby Mark V scope base, which you must purchase separately from manufacturers like Talley, Leupold, or Warne. The mounting holes use a #8-40 thread specification, and I recommend using a torque wrench set to 25 inch-pounds when installing the base screws to avoid stripping the threads. Allow for a 20-minute installation and alignment process before heading to the range.
- How long does shipping take to an FFL?
- Processing and shipping typically take 3-5 business days from order verification to departure from our warehouse, followed by 2-7 business days for ground transit depending on your FFL's location. You must provide your chosen FFL's license information before we can ship; we validate this with the ATF's FFL eZCheck system, which usually adds 24-48 hours to the initial processing time. Once shipped, you'll receive tracking information directly from the carrier.
- Can the TriggerTech trigger pull weight be adjusted lower than 2.5 pounds?
- No, the factory-set minimum pull weight for the installed TriggerTech unit is 2.5 pounds for safety and reliable ignition under field conditions; attempting to adjust below this risks light primer strikes or an unsafe hair trigger. The adjustment requires a 3/32-inch hex key and should be performed with a trigger pull gauge to ensure consistency; I recommend a final setting between 3.0 and 3.5 pounds for a balance of precision and defensive tension against gloves or cold fingers.
- Does this work with standard .25-06 Remington ammunition?
- Yes, it chambers and fires all commercially available .25-06 Remington ammunition loaded to SAAMI specifications, including 100-grain varmint loads up to 120-grain bonded hunting projectiles. The 1:10 twist rate barrel optimally stabilizes bullets in the 110 to 120-grain range; expect best accuracy with match-grade ammo like Federal Premium Sierra MatchKing or Hornady Precision Hunter, which typically groups under 1.0 MOA from this platform. Always test a new lot of ammunition for zero before hunting.