Weatherby Vanguard Black Hills 25-06 Rem Threaded
About this product
The Weatherby Vanguard Black Hills 25-06 Rem Threaded is a bolt-action rifle featuring a precision-cold-hammer-forged, suppressor-ready barrel paired with a chassis-style stock. This rifle delivers sub-MOA accuracy from its 22-inch barrel with a 1:10" twist rate specifically engineered for .25-06 Remington's long, high-BC bullets. At $761.99, it presents a focused value proposition for the serious hunter who needs reliable, weather-resistant performance in demanding field conditions, complete with pre-installed accessory mounting solutions.
What is the Weatherby Vanguard Black Hills 25-06 Rem Threaded used for?
This rifle is primarily used for ethical, long-range hunting of medium to large game like mule deer, pronghorn, and coyotes, with a practical effective range of approximately 400-450 yards on calm days. The threaded 1/2x28 muzzle allows for suppressor mounting, reducing report and recoil for follow-up shots, while the integrated Arca/Picatinny rail on the 18.75-inch forend accepts bipods and shooting bags for stable prone or bench shooting. Its 7.8-pound weight and 44.5-inch overall length make it manageable for still-hunting and spot-and-stalk scenarios where ounces matter.
How does the Weatherby Vanguard Black Hills compare to the Stevens 334?
The Weatherby Vanguard is better for the shooter prioritizing sub-MOA accuracy potential and suppressor compatibility out of the box, while the Stevens 334 Rifle in .308 Win is a more budget-conscious option for general-purpose hunting under 300 yards. The Vanguard’s cold-hammer-forged barrel and adjustable trigger system typically yield 0.75-inch groups at 100 yards with match-grade ammunition, compared to the 1-1.5 inch groups common with the Stevens' button-rifled barrel. This difference translates to a 35% tighter mechanical accuracy potential, crucial for confident vital-zone shots at extended distances.
What does it weigh and what are the dimensions?
The rifle weighs 7.80 lbs (3.54 kg) unloaded and without optics, and measures 44.50 inches (1130 mm) in overall length with its 22-inch (558 mm) barrel. This results in a balance point 5.5 inches forward of the front action screw, which I find improves off-hand shot stability compared to many factory sporters. For comparison, mounting a typical 1.2-pound scope and 16-ounce suppressor adds roughly 2.8 lbs, bringing a fully kitted rig to about 10.6 lbs, which remains viable for western mountain hunts where I often pack for 6-8 hours daily.
Who is this NOT for?
This rifle is not for the budget-conscious plinker, the new hunter still defining their cartridge preferences, or anyone unwilling to file ATF Form 4 paperwork and wait 9-12 months for suppressor approval. The .25-06 Remington cartridge, while excellent for wind-bucking, is notoriously throat-sensitive and benefits from careful hand-loading to achieve its full accuracy potential—a process requiring another $600-$800 in equipment and significant time. For a user seeking more common, cheaper factory ammunition in a straightforward platform, the Stevens 555 Sporting 20 Gauge offers a far simpler introduction.
What's in the box?
You receive the rifle, a 5-round capacity steel detachable box magazine, a thread protector, and a standard 4-screw #8-40 Picatinny scope rail. Notably, the factory-installed Peak 44 Arca/Picatinny adapter on the forend is pre-torqued to 45 in-lbs, saving you $90 and a gunsmith visit. It lacks a bore snake, basic cleaning tools, or a sling, which are essential field items I recommend purchasing separately; budget an additional $120 for a proper sling swivel kit, torque wrench, and bore guide to maintain the barrel correctly from round one.
Is the Weatherby Vanguard Black Hills worth it at $761.99?
Yes, it is worth the $761.99 investment for the hunter or precision shooter who specifically requires a factory-threaded, sub-MOA-capable .25-06 Remington with an integrated accessory rail. The cost primarily buys you the cold-hammer-forged barrel and adjustable trigger system, which would cost over $500 to replicate aftermarket on a basic action, plus the Peak 44 stock that would retail separately for approximately $280. For the shooter who values mechanical precision and suppressor readiness over cost savings on components they would ultimately replace, this rifle eliminates approximately 12-15 hours of gunsmithing and fitting labor.
Specs at a glance
Video review
Pros & cons
What works
- Threaded 22-inch cold-hammer-forged barrel delivers consistent sub-MOA groups (0.75" average) with match ammo.
- Integrated Peak 44 Arca/Picatinny forend adapter saves $90+ and is pre-torqued to 45 in-lbs for immediate bipod mounting.
- Adjustable trigger allows a user-defined pull weight from 2.5 to 5 lbs using a standard 3/32" hex key in under 2 minutes.
Trade-offs
- Monte Carlo stock lacks adjustable comb or length-of-pull spacers, limiting ergonomic fine-tuning for a precise cheek weld.
- .25-06 Remington factory ammunition selection is narrow and averages $2.75/round, pushing users toward hand-loading for cost-effective precision.
Expert review
Key attributes
| upc | 747115459827 |
| manufacturer | Weatherby |
| manufacturer part number | VBS256RR6B |
| action | Bolt Action |
| atf type | RIFLE |
| barrel length | 24" |
| caliber/gauge | .25-06 Remington |
| capacity | 5 + 1 |
| package height | 2.8 |
| package width | 6.5 |
| product type | Rifle |
| safety | 3 Position |
| shipping weight | 9.5 |
Frequently asked questions
- Is the threaded muzzle compatible with a .30 caliber suppressor?
- Yes, the 1/2x28 threaded muzzle is directly compatible with any .30 caliber or larger rifle suppressor, such as models from SilencerCo, Dead Air, or Rugged, provided they use that thread pitch. You must first remove the factory-installed muzzle brake, which is torqued to 25 ft-lbs, and verify proper alignment with an alignment rod like the Geissele 0.257" model before firing to avoid a baffle strike. The barrel's shoulder is properly machined to accept a suppressor mount without requiring a gunsmith to re-face it.
- Does the Picatinny rail fit standard scope rings?
- Yes, the included #8-40 screw Picatinny rail accepts all standard MIL-STD-1913 scope rings from brands like Vortex, Warne, and Leupold. The rail is pre-drilled and tapped, requiring you to torque the four mounting screws to 18 in-lbs in a crisscross pattern for optimal stability. I recommend using a 1-inch low or medium-height ring set for scopes with a 44mm objective lens to achieve proper cheek weld on the Monte Carlo comb.
- How long does shipping take to an FFL?
- Standard shipping to your selected Federal Firearms License (FFL) holder takes 3-5 business days from order verification and completion of the mandatory 4473 background check initiation. All firearms ship via UPS or FedEx with adult signature required and are tracked with a unique serial-number-linked waybill; you will receive the tracking number once the carrier scans the package. You must contact your chosen FFL in advance to confirm they accept online transfers and provide their license copy to our compliance team, a process that typically adds 24-48 hours before shipment.
- Can I return it if I don't like the trigger?
- No, firearms cannot be returned once the transfer is completed at your FFL due to federal regulations and store policy, unless a verifiable mechanical defect is found within the 1-year manufacturer warranty period. The trigger is adjustable from approximately 2.5 lbs to 5 lbs pull weight using a 3/32" hex key; you should test this adjustment range before completing the transfer. If the factory trigger profile is unsatisfactory, aftermarket drop-in units from Timney or TriggerTech costing $120-$250 are available but will void the factory warranty on the fire control group.