Winchester Model 70 Super Grade .300 Win Mag 26″ Walnut RH
Video review
Expert review
About this product
The Winchester Model 70 Super Grade is a high-end controlled-round-feed bolt-action rifle built for long-range precision and field reliability in its .300 Winchester Magnum chambering. It represents the pinnacle of modern classic rifle construction, blending Pre-'64 mechanical heritage with refined appointments like AAA French walnut and polished blueing. For serious hunters and shooters who demand first-shot certainty and sub-MOA accuracy, this rifle sets the benchmark.
What is the Winchester Model 70 Super Grade used for?
The Winchester Model 70 Super Grade .300 Win Mag is a dedicated long-range hunting and precision rifle. It's engineered for taking large game like elk, moose, and bear at extended distances where its 26-inch barrel and .300 cartridge excel at delivering high-energy, flat-shooting terminal ballistics. The combination of controlled-round-feed reliability, a precise MOA trigger, and an 8.37-pound weight makes it suitable for sustained positional shooting from a bipod or shooting sticks, though it requires disciplined recoil management for follow-up shots.
How does the Winchester Model 70 Super Grade compare to a Stevens 334?
The Winchester Model 70 Super Grade is mechanically superior in reliability and materials to the utilitarian Stevens 334 Rifle. The Winchester’s Pre-'64 style controlled-round-feed claw extractor and fixed blade ejector provide absolute cartridge control during the bolt cycle, a critical advantage when hunting dangerous game or operating from awkward angles where push-feed actions like the Stevens 334 can malfunction. While the synthetic-stocked Stevens 334 weighs less and costs significantly less, it cannot match the Winchester's fit, finish, or guaranteed mechanical extraction reliability under stress.
What does it weigh and what are the dimensions?
This rifle has a finished shipping weight of 8.37 pounds (3.8 kg) and measures 46.75 inches in overall length. Key dimensions include a 26-inch (660mm) 4140 chrome-molybdenum steel barrel with a 1:10 twist rate and a recessed target crown protected by a 0.060-inch chamfer. The magazine box has an internal length of 3.6 inches to accommodate maximum COL .300 Win Mag loads, and the grip-to-trigger reach is a standard 13.75 inches. Balance point is approximately 3.5 inches forward of the front action screw.
Who is this NOT for?
This rifle is not for a first-time shooter or someone on a strict budget for a casual range toy. The .300 Winchester Magnum cartridge generates over 28 ft-lbs of recoil energy in this configuration, and premium ammunition costs over $3.50 per round. It's also poorly suited for dense woods hunting where its 46.75-inch length and 8.37-pound weight become liabilities compared to shorter, lighter rifles like the Stevens 334 in .243 Win. Finally, left-handed shooters will find its right-hand-only stock and ejection awkward.
What's in the box?
The Super Grade ships with the rifle, a polymer transport case, one 3-round steel hinged floorplate magazine, and basic owner's literature. It does not include scope mounting hardware, a bore snake, or lubricants. The factory torque specification for scope base screws is 25 in-lbs, and the receiver is pre-drilled and tapped to #6-48 and 8-40 thread patterns, requiring the shooter to source their own bases and rings—a common $75-$150 additional investment. The Pachmayr Decelerator pad is pre-installed.
Is the Winchester Model 70 Super Grade worth it at $2,052.99?
At $2,052.99, this rifle is worth the investment for a shooter who requires and can utilize its specific mechanical and ballistic capabilities. You're paying for the controlled-round-feed action, the hand-fitted AAA walnut stock, and the polished blueing that requires over 47 separate finishing steps. Compared to a $570 synthetic rifle, the value is in guaranteed extraction and a refined interface that improves shooter consistency. For anyone not pushing shots past 400 yards or hunting in demanding conditions, a less expensive push-feed model will suffice.
Specs at a glance
Pros & cons
What works
- Pre-'64 controlled-round-feed extractor guarantees cartridge control — critical for dangerous game and awkward shooting positions.
- 1:10 twist 26-inch barrel stabilizes heavy 200+ grain .300 Win Mag projectiles for long-range terminal performance.
- AAA French walnut stock is hand-fitted and fully bedded, reducing action shift to under 0.002 inches under recoil.
- M.O.A. trigger adjusts from 3.5 to 5 lbs with a clean, sub-0.060-inch travel break.
Trade-offs
- 8.37-pound weight and 46.75-inch length make it cumbersome for still-hunting in thick timber.
- Polished blueing and fine walnut require diligent maintenance to prevent corrosion and stock damage in wet conditions.
- No included scope bases or rings — adds a minimum of $75 and fitting time before the rifle is field-ready.
Key attributes
| upc | 048702018619 |
| manufacturer | Winchester |
| manufacturer part number | 535239233 |
| action | Bolt Action |
| atf type | RIFLE |
| barrel finish | High Polished Blued |
| barrel length | 26" |
| caliber/gauge | .300 Winchester Magnum |
| capacity | 3 |
| color | BLUED |
| length | 50.3500 |
| number of magazines | 1 3 rd. |
| package height | 3.7 |
| package width | 9.7 |
| product type | Rifle |
| safety | 3 Position |
| shipping weight | 10.55 |
| sights | No |
Frequently asked questions
- Is the receiver milled for a Picatinny rail?
- No, the receiver is drilled and tapped for traditional two-piece scope bases only, using #6-48 and 8-40 thread patterns. You will need to purchase separate bases and rings; I recommend EGW or Leupold for a secure mount. Torque the base screws to 25 in-lbs using a calibrated driver.
- Can this rifle handle handloads at maximum COL?
- Yes, the magazine box is designed for a maximum cartridge overall length of 3.6 inches, which accommodates most published .300 Win Mag load data. The controlled-round-feed action reliably feeds rounds up to that length, but always verify clearance in your specific chamber with a dummy round before loading live ammunition.
- Does it come with a thread protector or muzzle device?
- No, the barrel is crowned with a recessed target configuration and is not threaded. If you require a muzzle brake or suppressor mount, you will need to have the barrel professionally threaded by a gunsmith, which adds approximately $200-$350 and requires a Form 1 or Form 4 tax stamp for a suppressor under NFA regulations.
- How long does shipping to an FFL take?
- Standard shipping to your selected FFL dealer via Ironclad Armory's logistics partner takes 3-7 business days after your background check and payment clear. You will receive a tracking number once the rifle is handed to the carrier. Remember, you must coordinate directly with your FFL for pickup, as they will conduct the final 4473 transfer.
- What is the trigger pull weight range?
- The M.O.A. trigger system is factory-set between 3.5 and 5 pounds, and is user-adjustable within that range with a simple hex key. The trigger breaks cleanly with minimal creep. I do not recommend adjusting it below 2.5 pounds for a field rifle, as that can compromise safety under adverse conditions.