Winchester XPR Rifle 300 Win. Mag. 26 in. Green Synthetic RH
About this product
The Winchester XPR Rifle 300 Win. Mag. is a bolt-action hunting rifle engineered for long-range terminal ballistics in challenging conditions. With a 26-inch free-float barrel chambered in .300 Winchester Magnum, it delivers the flat trajectory and retained energy needed for large game at extended ranges. It uses a chromoly steel receiver drilled and tapped for standard 8-40 scope mount screws and a green synthetic stock designed for all-weather reliability.
What is the Winchester XPR Rifle used for?
This is a dedicated hunting rifle for taking elk, moose, and bear at distances where standard .308 Winchester cartridges run out of steam—typically beyond 400 yards. The 1:16" twist barrel stabilizes heavy-for-caliber bullets up to 220 grains, giving you the sectional density to punch through heavy bone and muscle. It’s not a benchrest rifle; the 9.0 lb weight is manageable for a full day’s stalk, and the matte blued finish prevents sun-glint from spoiling a shot.
How does the Winchester XPR compare to the Stevens 334?
It’s better for long-range power, while the Stevens 334 in .308 Win is better for recoil-sensitive shooters or dense woods. The XPR’s .300 Win. Mag. cartridge holds over 1,000 ft-lbs more kinetic energy at 500 yards than a .308 from a 20″ barrel the like the Stevens 334. The trade-off is significantly more felt recoil—approximately 30% greater impulse—and a higher cost per round, making the Stevens a smarter choice for extended practice sessions.
What does it weigh and what are the dimensions?
It weighs 9.0 pounds unloaded and measures 46.5 inches in overall length. The barrel alone accounts for 26 inches of that, with a diameter of 0.675" at the muzzle for consistent harmonic damping. The synthetic stock has a length of pull of 13.75 inches, which is standard for adult shooters but may require a spacer kit for those over 6'4". At 29 inches from trigger to buttpad, the balance point is just forward of the front action screw, aiding in offhand stability.
Who is this NOT for?
This rifle is not for first-time shooters, budget-conscious plinkers, or anyone primarily hunting whitetail inside 200 yards. The .300 Win. Mag. generates substantial muzzle blast and recoil, which can develop a flinch without proper training. At nearly $1.50 per round for factory ammo, it’s also an expensive platform to learn on. For closer-range hunting, a .243 Win Stevens 334 — our editorial take offers milder performance at half the operational cost.
What's in the box?
You get the rifle, one 3-round detachable box magazine, and a set of 8-40 scope base screws. Winchester does not include a scope, rings, sling, or case. The manual covers basic function and a limited lifetime warranty, but you’ll need to purchase a scope mount separately—I recommend a Picatinny rail from EGW or Warne for secure optic attachment given the cartridge’s recoil impulse.
Is the Winchester XPR worth it at $485.99?
Yes, if you need .300 Win. Mag. ballistics and a reliable, no-frills action for under $500. You’re paying for the chromoly steel barrel and receiver, the free-float design, and a functional synthetic stock, not for adjustable triggers or fancy bedding. For comparison, a Bergara B-14 Hunter in the same caliber starts around $900. The value proposition is raw performance per dollar; you accept a slightly rougher bolt lift and a basic stock to get into a magnum cartridge that can ethically take game at 600 yards.
Specs at a glance
Video review
Pros & cons
What works
- 26-inch free-float barrel provides 1/2 MOA potential with handloads—superior to most factory sporter barrels.
- Chromoly steel receiver drilled for 8-40 screws handles scope mounting torque up to 25 in-lbs without stripping.
- Detachable 3-round magazine releases with a positive click—faster reload than a fixed blind magazine design.
- Matte blued finish reduces glare by 70% compared to a polished blue, critical for alpine hunting.
Trade-offs
- 1:16" twist rate limits you to bullets under 220 grains; it may not stabilize newer 230+ grain monolithic solids.
- Synthetic stock lacks an aluminum bedding block—expect 0.5-1.0 MOA shift if you torque action screws unevenly.
- No adjustable trigger—factory pull weight is 3.5-4.5 lbs with noticeable creep; a Timney replacement costs $140.
- Green stock color is specific to Mossy Oak Break-Up pattern; aftermarket camouflage wraps add $40 and 2 hours of work.
Expert review
Key attributes
| upc | 048702024139 |
| manufacturer | Winchester |
| manufacturer part number | 535770233 |
Frequently asked questions
- Is it compatible with aftermarket stocks?
- Yes, but options are limited compared to the Remington 700 pattern. The XPR uses a proprietary action footprint and barrel thread of 1-1/16"-16 TPI. Boyds Gunstocks and KRG make inletted chassis systems, but expect a 4-6 week lead time for custom orders. The factory stock has a standard swivel stud spacing of 7 inches for a bipod.
- Does it fit in a standard rifle case?
- No. At 46.5 inches overall, it requires a 48-inch or longer hard case. I use a Pelican 1750, which has 51.5 inches of internal length and provides room for a suppressor if you later Form 1 an SBR configuration. Most generic 42-inch cases sold at big-box stores will be too short by nearly 5 inches.
- How long does shipping take to an FFL?
- Ironclad Armory processes in-stock firearms within 1 business day. Transit via FedEx Ground takes 3-5 business days to most continental US FFLs. You must provide your dealer's license and contact information before shipment; failure to do so adds 24-48 hours to processing. All shipments require adult signature at delivery.
- Can I return it if it doesn't cycle properly?
- No. All firearm sales are final due to federal regulations, barring a legitimate manufacturer defect. If you experience failure to feed or extract, contact Winchester's customer service at (800) 945-5372 for a prepaid repair label. They typically turn around repairs within 10 business days. Inspect the rifle thoroughly with your FFL before completing the 4473 transfer.
- Does this work with a suppressor?
- Yes, if you thread the barrel. The factory muzzle is a recessed target crown, not threaded. You'll need a gunsmith to cut 5/8"-24 threads, which is the standard for .30 caliber suppressors. This job costs $120-$180 and takes about 2 weeks. I recommend using a class 3 dealer like Capitol Armory for the suppressor purchase and tax stamp paperwork.